Does anyone have this combination working?
K3, KPA500 and KRC2.
AUX Cable connected to the KPA500, then connected to one side of the supplied Y
cable, which is connected to the K3 ACC connection. The other side of the Y
Cable is connected to the KRC2.
With this connection the Amplifier will
These three products are integrated and working fine here since first adding
the KPA500 a month or two ago. I use the Elecraft KPAK3AUX cable and
Y-adapter, but not the key line interrupter. I can't think of what
configuration menu settings might cause or fix your problem, but it must be
Problem found!
With the help of Paul at Elecraft support we found the problem.
If the PR6 is activating DIGOUT1 Of The K3 KPA500 while when the K3 is in
transmit mode.
This will require (hopefully) a firmware modification to one or both units.
Many thanks to Dale Farmer at Elecraft Support
Ed and all...
It was the PR6 (6m Preamp) installation that was inhibiting PTT on the KPA500.
All is well now :o)
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Wed, 29 Jun 2011 12:41:55 -0700, Ed Muns w...@msn.com wrote:
These three products are
On Wed, Jun 29, 2011 at 7:45 PM, n...@n5ge.com wrote:
Problem found!
With the help of Paul at Elecraft support we found the problem.
If the PR6 is activating DIGOUT1 Of The K3 KPA500 while when the K3 is in
transmit mode.
Having a hard time parsing that sentence ;) ... but if you're using
5 matches
Mail list logo
