I just finished my KPA500 and am having some trouble.
I'm using it with a K3 and the Aux cable.
It powers up fine. HV is 73.0, FAN CTL doesn't turn fans on.
The fan does not run when I turn it off as stated in the manual.
The KPA500 utility can't connect with it.
Using the same cable I can use th
Regarding the fan: Pull the top cover and make sure the fan's power
cable is plugged in. It is easy to unplug the fan power while
installing the rear panel.
On Tue, 9 Oct 2012 00:13:55 -0700 (PDT), Stan AE7UT
wrote:
>I just finished my KPA500 and am having some trouble.
>I'm using it with
Hello
I had a similar problem, see:
http://www.mail-archive.com/elecraft@mailman.qth.net/msg123327.html
73 de Harry, DK2GZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/
All is well in Zion!
Thanks to all you Elecrafters for your help.
I took off the transformer and looked at the I/O board.
The 10 wire ribbon cable was loose. How the "H" did that happen?
Well, I pushed it down - reassembled and it appears to be working FB.
The nice thing is I was not at all nerv
4 matches
Mail list logo