Art,
The Y-BOX (v2.1 and later) converts any standard (economical) 15-pin M/F
DE-15 cable into the equivalent of a KPAK3AUX cable, plus it supports other
features not supported by the stock Elecraft cable, such as KPA500 /
KPA1500 remote power on/off via a K3 macro (DIGOUT1 to pin 8), and easy
To: Elecraft list
Subject: [Elecraft] KPAK3AUX cable length
Hi all,
Does Elecraft sell a longer version of the standard cable? I need about 3 more
feet. As an alternative, can 2 of these cables be used in series to provide the
extra length without creating any timing issues for the KPA1500?
Thanks
Hi all,
Does Elecraft sell a longer version of the standard cable? I need about 3
more feet. As an alternative, can 2 of these cables be used in series to
provide the extra length without creating any timing issues for the KPA1500?
Thanks & 73,
Art KZ5D
, 2017 9:45 PM
To: Alan. G4GNX ; Elecraft Reflector
Subject: Re: [Elecraft] KPAK3AUX cable
I've tested many "VGA extension" cables that do not have all 15 pins wired, or
short several pins together as a common ground. They work fine for VGA
monitors, but should never be connected to an
I've tested many "VGA extension" cables that do not have all 15 pins wired,
or short several pins together as a common ground. They work fine for VGA
monitors, but should never be connected to any Elecraft product except the
P3SVGA external monitor port.
Many VGA cables include connectors
Fred Cady’s book on the KPA500/KAT500 combination mentions that if you’re using
two cables to connect the AUXBUS signals between a KPA500, KAT500 and K3, it’s
possible to use a DE15HD cable as long as the other cable is a KPAK3AUX cable
wired as per the diagram. In the UK DE15HD is a bit of an
I have the KPAK3AUX cable set available.
As pictured here:
http://www.elecraft.com/manual/KPAK3AUX%20Cable%20Set%20Instructions.pdf
$22 shipped priority
Rich - N5ZC
__
Elecraft mailing list
Home:
New Optional KPA500 to K3 Aux cable kit P/N KPAK3AUX. Never used still in
bag. $25.00 shipped CONUS only. k1uo (at) uninets (dot) net. Reply offline
please.
__
Elecraft mailing list
Home:
elecraft.com
-Original Message-
From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
boun...@mailman.qth.net] On Behalf Of Richard Thorne
Sent: Saturday, September 14, 2013 5:32 AM
To: Elecraft Reflector
Subject: [Elecraft] KPAK3AUX Cable Length
How long is the KPAK3AUX cable
How long is the KPAK3AUX cable? Trying to determine if it's long enough
to reach for my desk configuration.
Can two cables be plugged together to make it longer to accommodate my
setup.
Thanks
Rich - N5ZC
__
Elecraft mailing list
: elecraft-boun...@mailman.qth.net [mailto:elecraft-
boun...@mailman.qth.net] On Behalf Of Richard Thorne
Sent: Saturday, September 14, 2013 5:32 AM
To: Elecraft Reflector
Subject: [Elecraft] KPAK3AUX Cable Length
How long is the KPAK3AUX cable? Trying to determine if it's long
enough
to reach
Hello,
I am planning to use a KPA500 together with the K3. I found some
descriptions to connect both units togetehr with the KPAK3AUX-cable
provided by elecraft.
With the key line interrupter I am able to handle as well the SteppIR
antenna.
But now I recognized another problem.
Karl-Heinz,
You can still use the AUX connector to handle FSK-IN, Elecraft provides a Y
adapter
so you can connect both.
A happy user of the KPA500 and K3 using FSK
Gordon - N1MGO
On 30 Mar 2012 at 11:21, Karl-Heinz - DL2FAG wrote:
Hello,
I am planning to use a KPA500 together
I'm having an issue with my RX antenna when using the Y-Cable that comes with
the KPAK3AUX cable kit. I have the K3 with sub receiver, KAT3 and a PR6 preamp.
I initially hooked up the Y-Cable on the back of the K3. One pigtail going to
the KPA500 via the KPAK3AUX cable and the other pigtail
How many pins are missing/ cut off on the AUXBUS cable connected to the
K3/KPA500? Mine is missing 4 pins, is this correct?
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KPAK3AUX-Cable-Instructions-for-the-KPA500-tp6357796p7260397.html
Sent from the Elecraft mailing
Pins 1, 6, 7, and 8 should be missing.
Phil - AD5X
How many pins are missing/ cut off on the AUXBUS cable connected to the
K3/KPA500? Mine is missing 4 pins, is this correct?
__
Elecraft mailing list
Home:
PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPAK3AUX Cable Instructions for the KPA500
How many pins are missing/ cut off on the AUXBUS cable connected to the
K3/KPA500? Mine is missing 4 pins, is this correct?
--
View this message in context:
http://elecraft.365791.n2.nabble.com
We've just place the instructions for the optional KPAK3AUX cable used
with the KPA500 on the website in our manual download page KPA500
section. Its also linked to from the order form.
The direct link is:
http://www.elecraft.com/manual/KPAK3AUX%20Cable%20Set%20Instructions.pdf
73, Eric
18 matches
Mail list logo
