I have tried the second quick tap. It worked with the old ant/coax but
offers no improvement now. Breaking out the VNA tomorrow.
Thank you to all who helped.
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing
Bob,
According to my KXPA100 manual (A2-2013) - "... tap *tune* again within 5
seconds. The ATU will do a second tune using smaller steps in inductance
and capacitance values."
All my Electraft ATUs have a similar feature. Downside - It does take much
longer to achieve the match.
73
George
Bob: the KXPA100 Utility operate page should have check boxes for manual
selection of L and C. There is also an edit box with up and down arrows to
change L and C one step at a time. See if you can wiggle those to a place that
better suits you. There is a save button once you’ve reached
I recently replaced/ upgraded the coax and balun on my Off center dipole and
no longer have to ability to get a 1:1 match using the tuner. I know it is
OCD (no pun intended) but I have always been able to get 1:1 with the
tuner.
Details:
Operating on low end of 80M 3.563M
Measuring the
4 matches
Mail list logo