Has anyone sent their Heil MH2 to AB5N Bob Nagy for his upgrade? I've never
been impressed with my K2 SSB tx audio and I've done everything Elecraft has
recommended to improve the TX audio, including sending it to Gary for alignment
-- Gary did a wonderful job aligning my K2, but the K2 TX audio
I've never owned or used a K2. However I have assembled two of the K3
kits for others who felt they were not capable of doing so. Thus I have
had the opportunity to use two different K3 radios. One of the very
serious short comings, and main reason for me not purchasing a K3
earlier, is the
Bob,
Are you saying the K3 TX audio was
unsatisfactory? If so, that's the first report of
it I've heard (assuming everything is adjusted
correctly).
BTW -- re the thread topic: My K2 has always
received outstanding audio reports, though
nowadays I use my K3. But I never much liked the
MH
I was a bit shocked, or at least surprised, at what K4TAX was saying. I think
he might mean the quality of the audio plus speaker system of the default K3,
not TX audio. Or, at least hopefully he means that. I know others have
complained about the level of audio volume or whatever in listeni
craft] MH2 question
I was a bit shocked, or at least surprised, at what K4TAX was saying. I think
he might mean the quality of the audio plus speaker system of the default K3,
not TX audio. Or, at least hopefully he means that. I know others have
complained about the level of audio volu
Yeah, this *has* to be a mis-communications somewhere. I use the Proset
with the iC2 electret element from Elecraft. I regularly get
unsolicited "really great audio" comments in contests, I'll likely get
several in the IARU this weakend if I decide to try out phone. I have a
nondescript, alm
My voice, i am told, makes any mic sound bad. So states the bride.:-(
The K3 EQ corrects this birth defect. So say "others"..:-)
Gary
Vk1ZZ
K3, KPA500-FT, KAT500-FT
On 10/07/2015 8:52 AM, "Fred Jensen" wrote:
> Yeah, this *has* to be a mis-communications somewhere. I use the Proset
> w
Also note that the K3 has stereo, 4-ohm-capable external speaker outputs. You
can really get pet-hair-raising amounts of audio out if you need it. Using two
speakers allows you to take advantage of the left/right main/sub RX audio as
well as audio effects.
73,
Wayne
N6KR
On Jul 9, 2015, at 3
Ed,
Several responses to your post have brought comments regarding the K3 TX
audio, but I have not seen any specifically addressing the K2.
The K3 TX audio can be tailored using the 8 band TX Equalizer which can
be used to make most any microphone sound like the best studio
microphone in the w
This system, being in the new K3S, should make a big difference in
receive audio. I certainly look forward to receiving my new K3S-F.
Thanks Wayne!
73 Bob, K4TAX
On 7/9/2015 6:05 PM, Wayne Burdick wrote:
Also note that the K3 has stereo, 4-ohm-capable external speaker outputs. You
can reall
I'm missing something. Wayne said that's in the K3 now. He did not say only the
K3S did he?
Tom NY4I
Principal Solutions Architect
Better Software Solutions, Inc.
727-437-2771
> On Jul 9, 2015, at 7:09 PM, Bob McGraw - K4TAX wrote:
>
> This system, being in the new K3S, should make a big di
K3S ONLY as of now.
I'm missing something. Wayne said that's in the K3 now. He did not say only the
K3S did he?
Tom NY4I
Principal Solutions Architect
Better Software Solutions, Inc.
727-437-2771
On Jul 9, 2015, at 7:09 PM, Bob McGraw - K4TAX wrote:
This system, being in the new K3S, sh
Bob,
With such positive expectations, I'm sure your K3S
will have great audio :-)
73, Phil W7OX
On 7/9/15 4:09 PM, Bob McGraw - K4TAX wrote:
This system, being in the new K3S, should make a
big difference in receive audio. I certainly
look forward to receiving my new K3S-F.
Thanks Wayne!
I think Bob is referring to the new, improved RX
audio (I think it's only RX) in the K3S DSP board,
not yet available as a K3 upgrade.
Phil W7OX
On 7/9/15 5:52 PM, Tom Schaefer wrote:
I'm missing something. Wayne said that's in the K3 now. He did not say only the
K3S did he?
Tom NY4I
Princ
But in the works and coming. 73, Guy K2AV
On Thursday, July 9, 2015, Phil Wheeler wrote:
> I think Bob is referring to the new, improved RX audio (I think it's only
> RX) in the K3S DSP board, not yet available as a K3 upgrade.
>
> Phil W7OX
>
> On 7/9/15 5:52 PM, Tom Schaefer wrote:
>
>> I'm m
The best and easiest fix for "bad K3 audio" is to simply tell the other ham
you're using a Kensucom. He will respond with, "Oh yeah, your Kensucom has
great audio, old man!"
Al W6LX
__
Elecraft mailing list
Home: http://mailman.qth.net/
Wow, bingo!
Vy 73 de Bert
WA2SI
Sent from my android device.
-Original Message-
From: Al Lorona
To: "elecraft@mailman.qth.net"
Sent: Thu, 09 Jul 2015 23:08
Subject: Re: [Elecraft] MH2 question
The best and easiest fix for "bad K3 audio" is to simply tell the oth
17 matches
Mail list logo
