Delayed and dialed in beats prompt but flaky! Thanks for the continued
focus on quality.
73,
Julie
On Thu, Jan 26, 2023 at 16:24 Wayne Burdick wrote:
> Hi Richard,
>
> Again, apologies to you and others for the long delay. Our supplier had
> their own supply chain problems, thanks to the pande
Will do, thanks! No worry here, Wayne. Will be able to give it a try
tomorrow.
Rich
NU6T
On Thu, Jan 26, 2023, 1:23 PM Wayne Burdick wrote:
> Hi Richard,
>
> Again, apologies to you and others for the long delay. Our supplier had
> their own supply chain problems, thanks to the pandemic, and t
Hi Richard,
Again, apologies to you and others for the long delay. Our supplier had their
own supply chain problems, thanks to the pandemic, and they had to go through
two sets of prototypes to get everything dialed in.
Let us know how the mic works.
73,
Wayne
N6KR
> On Jan 26, 2023, at 11
FYI: My long ago ordered MH3 mic arrived today. Feels good, but I have not
used it yet.
Thought some would like to know that they are shipping.
Rich
NU6T
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Hel
Exactly particularly when they've been promised and the promised
updates are a few months late.
Lee, AA4GA
On Thu, Sep 29, 2022, 5:47 PM Mike Smith VE9AA wrote:
>
>
> p.s.-Wayne: updates would be nice ;-D
>
>
__
Elecraft mailing li
Dean,
I wish I could tell you. I ordered the same kx2 shack-in-a-box before Xmas
last year (after a short 1-2 month wait) and was overjoyed to receive it in
January. I love the rig btw.
They know there was no mic included,(I've sent emails, but there was nothing
indicated on my order that
I bought a KX2 shack in the box package back in February.
I received the radio around June but still haven't received the Mic.
Any idea when these will be available?
Thanks
Dean (K7DSF)
__
Elecraft mailing list
Home: http://mailman.qth.net
Geert,
From your description of the "straight connections" and round plug, I
believe you are referring to the MH4 - the original question was about
the MH3 which has a 1/8 inch TRRS plug and resistors in the microphone
for the buttons.
The MH4 is usable with the K2 and K3, the MH3 is usable
an Liston-Smith
Sent: 03 September 2021 10:08
To: Elecraft List
Subject: [Elecraft] MH3 mic case
Does anyone know if Elecraft sell replacement cases for this expensive
microphone? I've barely used mine (I'm a CW chap) and it's already fallen
apart! The three plastic internal mounting
Does anyone know if Elecraft sell replacement cases for this expensive
microphone? I've barely used mine (I'm a CW chap) and it's already fallen
apart! The three plastic internal mounting pillars have snapped off. I guess
it's been dropped, but only on to carpet and I'm minded to think a $70
I have repaired several of these for ZL amateurs - by a similar method.
My theory is that the large lump of steel plate (27g) in these mics could
contribute as it means the mic has more kinetic energy when dropped. Three
of the mics I repaired were damaged in shipment from USA to New Zealand.
When
I worked in a factory making injection molded plastic items, which I
presume the mic cases are. If the machines are not adjusted properly --
temperature, pressure, dwell, cooling, etc., it's possible to make parts
that are extremely brittle. Sometimes the stress of assembly and
shrinkage over t
Ian,
Elecraft has had a 'rash' of those incidents, but I thought they
addressed that with the mic vendor (yes, Elecraft does not stock parts
for the mic, they buy them whole from the vendor).
There was some speculation a few months ago about the cause -- and I
don't know the answer. Many th
gt;
> If this was some cheap, unbranded stuff from the Far East, fair enough,
> but it isn't!
>
> Come on Elecraft...
>
> Ian, G4JQT
>
>
> From: elecraft-boun...@mailman.qth.net
> on behalf of Ian Liston-Smith
>
> Sent: 03 Se
If this was some cheap, unbranded stuff from the Far East, fair enough, but it
isn't!
Come on Elecraft...
Ian, G4JQT
From: elecraft-boun...@mailman.qth.net on
behalf of Ian Liston-Smith
Sent: 03 September 2021 10:08
To: Elecraft List
Subject: [Elecraft] MH
o:elecraft-boun...@mailman.qth.net] On Behalf Of Bill Frantz
Sent: Friday, September 03, 2021 11:21 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] MH3 mic case
I like to mix in some short lengths of fiberglass with the epoxy. It
provides the strength while the epoxy provides the "glue" holdin
I like to mix in some short lengths of fiberglass with the
epoxy. It provides the strength while the epoxy provides the
"glue" holding everything together. An example is repairing the
ashtray cover on my 1993 Mazda Miata (with 300,000+ miles). I
repaired it at least two years ago, and it is sti
I don't have one and don't know the what material the housing is made of, but
this adhesive usually does a much better job than epoxy on plastics:
https://www.3m.com/3M/en_US/p/d/b40071871/
I have similar things happen with other items...the long term stress causes the
bosses to eventually crac
My K2 works great with a Kenwood MC-43S mic. Also works with a D-104
with a FET
voltage follower and a standard microphone plug.
- Jerry KF6VB
On 2021-09-03 06:53, Tommy58 wrote:
My MH-3 case also recently fell apart and this happened when I finally
took it out of the box to
ember 03, 2021 7:53 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] MH3 mic case
My MH-3 case also recently fell apart and this happened when I finally took
it out of the box to use it for the first time a few weeks ago. The posts
that the screws go into were all busted off the front
My MH-3 case also recently fell apart and this happened when I finally
took it out of the box to use it for the first time a few weeks ago. The
posts that the screws go into were all busted off the front case.
HORRIBLE design. I will not buy another at that price point.
Anyone know of an after
th the reinforcement it is now better than new.
73
Len
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ian Liston-Smith
Sent: Friday, September 03, 2021 3:09 AM
To: Elecraft List
Subject: [Elecraft] MH3 mic case
Does anyone kno
Does anyone know if Elecraft sell replacement cases for this expensive
microphone? I've barely used mine (I'm a CW chap) and it's already fallen
apart! The three plastic internal mounting pillars have snapped off. I guess
it's been dropped, but only on to carpet and I'm minded to think a $70 mic
Interesting as I have a MH3 for my KX3 bought during the initial roll
out of kits (SN475) and mic looks like new. Most its life is inside
but it did take a two-month trip logging 11K miles as a mobile last
summer. Just wondering if long exposure to sunlight in a mobile is
cause of cracks? I
You mentioned issues with cracks in the
MH3 mic. I haven't experienced that with
my MH4, in fact with my recent order for a
K4, I ordered an additional MH4 so I can
have one with the K3s as well.
But as to repairing plastic cracks,
depending on where they are, you might
want to get some plas
I don't think any of the MH3 microphones were made by Heil, although I
may be mistaken.
I would not be surprised if Elecraft had several vendors for the
microphones - a much better solution than having a single source supplier.
In any case, contact supp...@elecraft.com for assistance. If the
Don,
Interesting. My KX3 is s/n 324, an oldie. Do you know who is making
the new mics? I, too, may need that info for future reference.
73,
Barry
K3NDM
On Tue, Jun 11, 2019, 2:40 PM Don Wilhelm wrote:
> Barry,
>
> I do not believe that is true anymore (except for the ProSet-K2).
> The orig
Barry,
I do not believe that is true anymore (except for the ProSet-K2).
The original MH2 microphone was Heil, but that was changed a very long
time ago.
Since you just bought the MH3, your best recourse is to contact Elecraft
about a replacement.
73,
Don W3FPR
On 6/11/2019 2:15 PM, Barry
I would contact Heil. The mics that Elecraft use/sells are theirs. Heil
should be able to get your answers.
73,
Barry
K3NDM
On Tue, Jun 11, 2019, 9:19 AM Kent Powell wrote:
> I'm now on my second MH3 mic for KX3 and discovered it too has several
> cracks in the case. I returned my first one to
Hi Kent
You might find that getting another Mic and cabling it correctly might be
your best option.
Elecraft does what other vendors do. Mic's are disposable and most are
made off shore.
Mike
On Tue, Jun 11, 2019 at 9:18 AM Kent Powell wrote:
> I'm now on my second MH3 mic for KX3 and discov
I'm now on my second MH3 mic for KX3 and discovered it too has several
cracks in the case. I returned my first one to Elecraft and received this
one at a reduced price. This time I asked about the proper adhesive to
hold it together. The answer:
"As the hand microphones are third party devices w
That's to all who responded.
73
Tim
NZ8J
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Or just spend the ~$70 and buy an MH2. It's already wired ready to go.
Sent from my iPhone
...nr4c. bill
> On Jan 1, 2017, at 6:49 PM, Don Wilhelm wrote:
>
> Ron,
>
> I am not going to give you a step by step set of instructions, but the K3 (no
> hyphen) manual has the pinout for the 8 pin
Ron,
No. Pin 6 is NOT bias, but a source of 8 volts.
Bias to the microphone is applied through a resistor, not directly from
a voltage source.
All you need to do is turn BIAS on in the MIC SEL menu. See the K3
manual for the button to tap to toggle the bias setting.
73,
Don W3FPR
On 1/1/20
Thanks, Don. I was thinking along those lines, but I wasn't sure about
the getting bias from the K3. On the Foster plug I am wiring, should
pin 6 (bias) be connected to pin 1 to supply bias?
Ron
On 1/1/2017 6:49 PM, Don Wilhelm wrote:
Ron,
I am not going to give you a step by step se
Ron,
I am not going to give you a step by step set of instructions, but the
K3 (no hyphen) manual has the pinout for the 8 pin Foster jack, and the
KX3 manual has the pinout for the MH3 mic plug.
Match up the AF lines and the shell (AF ground) with the 8 pin
connections, and match up the PTT o
HNYto all!
Has anyone made an adapter cable to allow the MH-3 mic to be used with
the K-3? I acquired a KX3 with its mic, and a K-3 without a mic, and
would like to be able to use the same mic on both rigs.
Any wiring tips?
__
El
Neal,
Have you tried plugging it into the rear panel Mic connector? - set bias
on and it should work just fine on the K3.
Yes, it will not work with the front panel 8 pin jack without an adapter.
73,
Don W3FPR
On 9/2/2013 4:56 PM, Neal Enault wrote:
I really like the feel of my MH3 mic. Fa
Put me on the list too!!
73, Joe W2KJ
I QRP, therefore I am
On Sep 2, 2013, at 4:56 PM, Neal Enault wrote:
> I really like the feel of my MH3 mic. Far more than my MH2. How about an
> adapter so I can use it on my K3? Yes, I could build one, b
I really like the feel of my MH3 mic. Far more than my MH2. How about an
adapter so I can use it on my K3? Yes, I could build one, but I am getting
lazy in my old age.
Neal WA6OCP
__
Elecraft mailing list
Home: http://mailman.qth.ne
40 matches
Mail list logo