6M open in Midwest to south.
73,
Bill
K9YEQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
--
73, Bill, K8TE
Message: 13
Date: Mon, 11 Jun 2018 11:03:14 -0700 (MST)
From: n6hz
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3: Left span limit changes
Message-ID: <1528740194456-0.p...@n2.nabble.com>
Content-Type: text/plain; charset=us-ascii
Hi Bill,
Currently the P3
Having the P3 remember the last-used span *and center frequency* on each
band across power cycles when the P3 is in Fixed mode will be a big
improvement, even if the P3 ignores the operating mode. The K3 remembers
the last-used frequency and mode on each band, so the two devices will
(more or
Hi Bill,
Currently the P3 stores span and reference level based on band, but not
mode. It would get pretty complicated to add mode into the mix. I know
quite a few customers have had great results with the Genovation keyboard
and setting up macros to do this. The next BETA release of P3/SVGA
Yes Skip, I too wish the P3 settings would remain with each band and mode.
In contests like the IARU HF Championship, ARRL 10m, etc. where both modes
are allowed, keeping appropriate bandwidth settings and the RX bandpass
locations on the P3 would be very helpful!
Yes, we can use a K-Pod or
Hi Fred,
Thanks for the report, I've added this to my bug list.
73,
Paul
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I got two replies, one off-list, that they can replicate this effect.
Study of the manual did not answer the question ... or provide a fix ...
but I'm acutely aware that words that someone writes and that are
crystal clear to them may [and often are] not nearly that clear to me. [:-)
If
Skip,
I can replicate your scenario and my K3 does the same thing. When I first
read it I was thinking a CW offset shift, but I'm sure that was a
pipe-dream.
You noted your left edge is at: 14020.000 ... mine (with a span of 20) is
at: 14018.000. That is the only difference, but again I
1. Serial path is PC-->P3-->K3
2. VFO-A is on 14028.000 CW
3. VFO-B is on 14300.000 SSB
4. P3 is in fixed-tune mode [cursor moves, screen edges remain at fixed
frequencies as I tune], SPAN=20 KHz, left edge is 14020.000
5. Tap A/B
6. K3 goes to 14300.000 SSB, left edge of P3 is 14300.000,
9 matches
Mail list logo
