Re: [Elecraft] P3 frequency Display

reseating a card or connector on multi million dollar equipment > than part replacement. > > leroy AB7CE > > -Original Message- > From: N4ZR > Sent: Thursday, June 10, 2021 9:22 AM > To: elecraft@mailman.qth.net mailto:elecraft@mailman.qth.n

Re: [Elecraft] P3 frequency Display

: [Elecraft] P3 frequency Display I was cruising the archive yesterday on another P3 question and was struck by how many people reported problems that cleared up when they reinserted or tightened connectors __ Elecraft mailing list Home: http

Re: [Elecraft] P3 frequency Display

I was cruising the archive yesterday on another P3 question and was struck by how many people reported problems that cleared up when they reinserted or tightened connectors 73, Pete N4ZR Check out the new Reverse Beacon Network web server at . For spots, please

[Elecraft] P3 frequency Display

Thanks for the various ideas but still no solution to my problem. I can only think either my Elecraft cable P3/RS232 is partially faulty – (my PC is however picking up the frequency info for the logging program from the PC RS232 socket on the P3) or there is a firmware problem in the P3 which I

[Elecraft] P3 Frequency Display

1) Ref pp 19 of K3S owners manual. 2) Make SURE the RJ45 is plugged in . You must heat the latch “click” plugging this cable in, or it may not be making connection. de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list

[Elecraft] P3 Frequency Display

The K3S is connected using the Elecraft RS232P3 cable and in the P3, the radio selected is the K3 and the RS232 speed is 38400 baud. I believe the cable is working OK as I am connecting from the P3 RS232 port to my PC at 38400 for CAT control in my logger. Any other ideas please? 73 Ray G3XLG

Re: [Elecraft] P3 Frequency Display

That sounds like either, there is no RS232 connection cable between the K3(S) and the P3 or, the P3 radio configuration is not properly set. Check the P3 manual for radio configuration and RS232 port speed etc. Martin, HS0ZED On 9/6/64 19:08, Ray Spreadbury via Elecraft wrote: My new to me

[Elecraft] P3 Frequency Display

My new to me P3 is not displaying the frequency but rather at the top has a 0 in the middle and +5, and -5 at either end if the spread is set to 10 for example. How do I get the frequency displayed please? 73 Ray G3XLG Sent from Mail for Windows 10

[Elecraft] P3 Frequency Display: My Mind is on Vacation

I just got around to updating the firmware from 1.00 to 1.05 on my P3. Unless I am dreaming, in 1.00 I was able to see upper and lower frequencies (as well as center freq) displayed, not just the span range. With the new firmware, I can't seem to get the actual frequencies displayed. The manual

Re: [Elecraft] P3 Frequency Display: My Mind is on Vacation

Hi I see this too sometimes when I turn the K3 on which automatically turns on the P3. I don't see the frequencies or filter brackets. Changing bands or modes usually gets the P3 displaying the data. Randy K7AGE __ Elecraft mailing

Re: [Elecraft] P3 Frequency Display: My Mind is on Vacation

David, Fixed Tune mode has upper lower frequencys while Tracking mode has +/- Span George AI4VZ _ _ _ _ _ _ _ _ I just got around to updating the firmware from 1.00 to 1.05 on my P3. Unless I am dreaming, in 1.00 I was able to see upper and lower frequencies (as well as center freq)

Re: [Elecraft] P3 Frequency display

Alan Bloom wrote: I think the PowerMate must be using UP and DN commands to tune the K3 up and down. Currently the K3 does not send updated frequency information to the P3 when receiving those commands. This is on Wayne's bug list. Yes, that's exactly what it (or rather KTune) does.

[Elecraft] P3 Frequency display

I've noticed one inconsistency with my P3 so I guess this is a request for addition to the P3 wishlist. It's a small thing and if it were never changed I'd still be as happy as a clam at high tide with my K3/P3 setup. I realize that even mentioning it is like complaining about the shape of

Re: [Elecraft] P3 Frequency display

That's a nifty knob, Jim. But how do you achieve 2-axis control with it like a mouse or trackball? The web site simply says does everything a mouse does... Wishes like yours are how many product improvements (and bugs) are noted and handled, provided they're Elecraft issues and not in the

Re: [Elecraft] P3 Frequency display

have you tried with the AL1 or AL2 box checked on the virtual port you are using for the PowerMate knob? I don't have one, but I thought the AL1 and AL2 had something about feed through of commands.? can't rem for sure, might try it just for grins, might have to restart and re connect

Re: [Elecraft] P3 Frequency display

I think the PowerMate must be using UP and DN commands to tune the K3 up and down. Currently the K3 does not send updated frequency information to the P3 when receiving those commands. This is on Wayne's bug list. Alan N1AL On Sun, 2011-03-27 at 15:06 -0500, jpk5...@cox.net wrote: I've