Hello all, I am trying to figure out why our P3 panadapter sometimes but not
always shows a group of vertical green stripes that cover about 1/6 of the
width of the screen. These stripes are not related to RF frequency because if
I switch bands they remain in the same location. If I remain on
Various kinds of 'junk' on the screen have been reported to be caused by
coax jumpers with poor shield contact at one or both ends. Try another
cable if you haven't already.
On 20 Oct 2014 17:08, jsdroys...@nc.rr.com wrote:
Hello all, I am trying to figure out why our P3 panadapter sometimes
Sound like TFT screen h/w related I got a laptop that does something
similar with an external monitor IF the screen cable gets kinked or is
not connected properly. Check all the cables and connectors and vertical
lines or a somewhat 'green' image cleans up. I'd take a look at the P3
Hi Julie,
It almost sounds like you have the span set very narrow and what you are
seeing is the center frequency marker. What happens when you adjust the
span, does the green stripe change width? If you would, please take a
screen shot of the display using the P3 Utility and email it to me.
4 matches
Mail list logo
