"I prefer an inverted
V over a vertical but in 5H3 deep in the bush filming wildlife on a TV
contract I didn't always have trees at hand!"
Hm...where has creativity gone to? Use to giraffes as I did!
:)
The Drake equation is:
N = R(200 billion) x Fp x Ne x Fl x Fi x Fc x L
where:
N = the numbe
I'm running 5.26 here. I don't have the KXV3B in this K3.
In CONFIG:KXV3, tapping the '9' key toggles between KXV3 and KXV3B. I
haven't consulted the current manual, so don't know if this hidden
function is suposed to work. It will get you out of the woods though.
73!
matt
W6NIA
On Sat, 06 Ju
Ah, yes
After setting KXV3B mode, don't forget to exit the CONFIG menu and
power-cycle the K3. It should be fine after that step.
73,
matt
W6NIA
On Sat, 06 Jun 2015 14:58:08 -0700, you wrote:
>I'm running 5.26 here. I don't have the KXV3B in this K3.
>
>In CONFIG:KXV3, tapping the '9' key
I recently encountered an odd problem which I thought I would share in case
anyone else experiences it. My KPA500/KTA500 combo refused to work on 20
meters. It appeared that the amp was not keying, but only on this band. I
suspected a problem in the amp, but when I removed the tuner and connecte
That stuff is sold as shelf and drawer liner, and is available at just
about everywhere kitchen supplies are sold. (Mine came from that mecca of
capitalism, Wal-Mart.) It works great. Having never learned how to use a
bug, I don't smack my paddle around like some do; however, my Bencher BY
Hi Ora...
I'm confused. You say you removed the tuner and connected the amp directly
to the transceiver?
My transceiver is connected directly to the amp at all times. The tuner is
between the antenna and the amp. Removing the tuner would connect the
antenna directly to the amp (ok if a good, reso
I think he means the control cable. KAT500 comes before KPA500 there and
three tunes has the ability to interpret PTT to the amp.
Jim Rhodes
K0XU
On May 1, 2017 10:06, "Kevin - K4VD" wrote:
Hi Ora...
I'm confused. You say you removed the tuner and connected the amp directly
to the transceiver
Hi Jim. Yep, Ora caught me offline and put me back on track. It's was a
case of me thinking RF flow and Ora was talking about keying.
73,
Kev K4VD
On Mon, May 1, 2017 at 2:56 PM, Jim Rhodes wrote:
> I think he means the control cable. KAT500 comes before KPA500 there and
> three tunes has the a
In a message dated 9/19/2007 7:03:38 P.M. Pacific Daylight Time,
[EMAIL PROTECTED] writes:
That stuff is sold as shelf and drawer liner, and is available at just
about everywhere kitchen supplies are sold. (Mine came from that mecca of
capitalism, Wal-Mart.) It works great. Having never
Anyone in the UK know where this stuff can be bought over here?
Seems to me, you guys in the US have lots of good stuff just sitting around
on shelves crying out to be purchased - over here, we have to search for it
- rather like a trek up the Amazon to find a rare species!
> That stuff is sold a
Blu-tack works fine
Bryan GM3AKF
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http:
You can buy the stuff in places like Halfords, where it is sold as a tool
drawer liner.
Hope that helps
73 Stephen G4SJP
On 20/9/07 10:09, "David Ferrington, M0XDF" <[EMAIL PROTECTED]> wrote:
> Anyone in the UK know where this stuff can be bought over here?
>
> Seems to me, you guys in the US
>
> Anyone in the UK know where this stuff can be bought over here?
Amazon.com sells it:
http://www.amazon.com/Griptex-Wonderliner-240-Inch-Standard-White/dp/B000H7VGTK/ref=pd_bbs_sr_1/002-3444193-2826424?ie=UTF8&s=home-garden&qid=1190309731&sr=8-1
(sorry 'bout the long URL) ... chances are tha
Non-skid material is sure available in most caravaning and
camping-car related shops. I have used it in my car for some
years. Handy and cheap.
Benny OH9NB
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to
Thank you Chris, from Amazon.co.uk :
http://www.amazon.co.uk/Grip-Liner-Multi-Purpose-150cm-30cm/dp/B000V1QPY8/re
f=sr_1_23/026-5812468-6916424?ie=UTF8&s=home-garden&qid=1190361451&sr=1-23
(Grip Liner in Home & Garden)
On 20/9/07 18:36, "Chris Kantarjiev" <[EMAIL PROTECTED]> sent:
>> Anyone in t
t; <[EMAIL PROTECTED]>
To:
Sent: Thursday, September 20, 2007 4:09 AM
Subject: Re: [Elecraft] solution to sliding paddles
> Anyone in the UK know where this stuff can be bought over here?
>
> Seems to me, you guys in the US have lots of good stuff just sitting
> around
> on she
gt; To: "elecraft@mailman.qth.net"
> Subject: Re: [Elecraft] solution to sliding paddles
>
> Anyone in the UK know where this stuff can be bought over here?
>
> Seems to me, you guys in the US have lots of good stuff just sitting around
> on shelves crying out to be purc
K2 #4283 has been on the air for a couple days or so.
I thought I'd pass on something that might help others. After bolting on
the heatsink (the bottom rear part of the case) to Q7 and Q8, the manual
says to check that the collectors are not shorted to the case. Mine
were. I had the heatsink on an
I had a lot of helpful responses to my post below a couple of weeks ago. I
thought I'd let everybody know how I fixed the problem.
Added a Radio Works T-4G Line Isolator at the antenna base connecting
its ground strap to a dedicated 8 foot ground rod. Connected the
Elecraft K3 ground a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Brett, et. al.,
I found the reason the Dahs were not playing on my paddle: the new lead
I connected to the paddle had an intermittent dis-continuity that
finally failed last night. I replaced the lead and "back in business."
Chagrin :-o
Regar
*/The event that disabled jack 13 from taking CI-V data from my 7610 to
the KPA1500, Remote to Remote cable working was
I had changed the Menu XCVR Serial Host setting to Enabled it needs to
be Disabled. I usually take notes of all changes but did not this time
only remembering that the 7610 wa
Many thanks to all who replied to my post. The issue appears to be "the Pin
11 problem"--which I'd read about before posting but wasn't sure it
described my situation. Emails from several of you have helped me understand
this issue better and I believe a modified cable with Pin 11 removed will
reso
The SUB receive on the KX3 is great for working pile-ups. The issue I have is
when the DX station is weak, turning up the audio volume to hear the DX makes
the pile-up so loud I can't hear the DX. Anyone know of a simple solution to
making the pile-up audio lower and DX louder other than an au
23 matches
Mail list logo
