In response to my question on the Win- Fldigi Reflector that I asked regarding
waterfall adjustments and the fact that I was seeing no signals on the Fldigi
Scope, Dave W1HKD responded,--- If you need those controls set to the maximum
range and lowest absolute signal (or close to it) then you
Are you sure you have configured fldigi to use the correct sound
device? With my K3 set to CONFIG:LINE OUT = Nor 10, microHAM
interface with the RX MAIN pot at ~ 10:00, and "Line (microHAM
CODEC)" level set to 80% in the Windows Sound Control panel
(Recording Devices) - Windows 10, there is no
>
> Be sure you have the correct audio interface selected in the FLDIGI Config
> menu. Devices select Port Audio and the correct values in Capture & Playback
> window
>
> Also set the FLDIGI Upper Signal level to -10 to -20 dB. And set the FLDIGI
> Signal range to -60 to -90 dB. These are
no signals on the Fldigi
Scope, Dave W1HKD responded,--- If you need those controls set to the maximum
range and lowest absolute signal (or close to it) then you are probably
starving Fldigi for Rx audio--
__
Elecraft mailing list
Home
I use FLDIGI with my K3S with excellent results. I can provide screen
shots of the set-up if and as needed.
73
Bob, K4TAX
K3S, s/n 10163
On 1/13/2016 3:02 PM, paul ecker via Elecraft wrote:
In response to my question on the Win- Fldigi Reflector that I asked regarding
waterfall adjustments
After reading received comments, I verified my settings, they are:In Fldigi-
Settings- Audio- Capture- Line(6-microHAM CODEC) ;
Playback - Headset Earphone (6-microHAM CODEC) In the K3 - config-
LIN OUT - nor 010; the microHAM DK II RX MAIN Pot is at
6 matches
Mail list logo