Hello all; I want to remote my K3. I have the current version of HRD
software.
But I don't know where to go from here.. Yes I have High speed internet.
(Hughes Net)
Please respond to me off forum. w0...@yahoo.com
This is a project I would like to get going next year.
Thank you, Bill,
On 18 Dec 2013 06:40, W0WFH Bill wrote
>
> Please respond to me off forum. w0...@yahoo.com
>
Please reply on here; I would be interested too.
73 de David G4DMP
David Pratt
__
Elecraft mailing list
Home: http://mailman.qth.net/mailm
I'm cheap. I don't throw things away until they are beyond any reasonable
use plus I like toys. So here is how I run my K3 remotely:
I have an old laptop for the shack computer. It runs HRD, has a four port
USB-Serial cable and wifi to the home LAN. It takes only a little power,
doesn't cost m
å vegne af Rick Bates
Sendt: 18. december 2013 10:59
Til: 'David Pratt'; 'W0WFH Bill'
Cc: 'elecraft forum'
Emne: Re: [Elecraft] Using the K3 remote
I'm cheap. I don't throw things away until they are beyond any reasonable use
plus I like toys. So here is
Rick and others,
I use a power strip accessible via Ethernet. This power strip has an IP
address and can be accessed independently from everything else in the
remote radio system. I access this power strip to reset the PC if it has
gone off the rails. I use this power strip to power cycle the
On 18/12/2013 09:58, Rick Bates wrote:
In the event that there is a power failure, someone has to have physical
access to the station to turn the K3 power back on. I'm working on this
(use an alarm or tickle the ACC line for now). That someone also makes a
pass through the house to water plant
Stewart,
See page 44 of the manual. You cannot simply strap between ACC pins 5
and 8 - that connection must be removed after the power off command is sent.
73,
Don W3FPR
On 2/5/2014 9:49 AM, Stewart Bryant wrote:
I have a K3 that I wish to operate remotely.
I am happy to leave it running a
Hi Don
That is at odds with the FAQ
http://www.elecraft.com/K3/K3FAQ.htm#auxbus
"I understand that if I short two pins from the ACC connector on the
back I can turn the rig on. When shorting those two pins is it
momentary or constant?
"Momentary (at least 0.5 second). Or you can leave it o
Hi Don
True(ish) I tend to leave the rigs running for weeks on end
doing things like WSPR monitoring in their spare time.
However I do have access both local and remote access
to the power supply.
Stewart/G3YSX
On 05/02/2014 16:18, Don Wilhelm wrote:
I don't think it is at odds with the FAQ.
I don't think it is at odds with the FAQ. Notice the part that says "at
least until you want to turn the rig off."
I think you *would* want to turn it off at some point.
73,
Don W3FPR
On 2/5/2014 11:05 AM, Stewart Bryant wrote:
Hi Don
That is at odds with the FAQ
http://www.elecraft.com/K3
10 matches
Mail list logo
