-- significantly reduces
tip life and requires frequent tip cleaning.
w9gb
- Original Message -
From: Koaps [EMAIL PROTECTED]
To: Elecraft Reflector elecraft@mailman.qth.net
Sent: Friday, May 25, 2007 8:47 PM
Subject: [Elecraft] Weller temp setting for KX1 build
Hi Guys,
I'm getting ready
Hi Guys,
I'm getting ready to start in on my KX1 build but one
thing I'm a bit stuck on is the setting for my new
Weller WES51 solder station.
Can anyone using one of these things suggest how I get
the temp right?
I read the manual that came with it, but it really
didn't make much sense to me,
Chris,
I find a setting of 700 degrees F about right for me.
An even better indication is to see how long it takes for solder to
flow. If you can achieve a good solder connection in 2 to 3 seconds,
that is about the right temperature. If it takes longer for the solder
to flow out to a
I built all my elecraft stuff with the soldering iron set at about
630-660F.
Bigger parts needed more heat, but for almost everything small,
and the .020 solder, that heat was enough to give a nice solder
connection.
I had zero solder problems on all my stuff.
Brett
N2DTS
Hi Guys,
I'm
Thanks Don and Brett,
Just the bit of info I needed.
Thanks again for the help, I'm really excited about
building my KX1. I spend some extra money to make sure
nothing goes wrong with ESD(I got a mat, wrist strip,
and Monster surge protector with coax hookups, I
figured I could use it to ground
5 matches
Mail list logo