Hmm. I may be on to something here. Channel 00 is 146.520 simplex and
channels 1-7 are the NOAA weather channels (162.400-162.550 in 50kHz
increments). It appears if I put frequencies in there that are all within
the ham band it works.
So how do I program in the non-ham band frequencies via compu
That is a good thought. I switched to 38400 and no luck there either. Same
thing.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Writing-memories-to-KX3-via-K3-Freq-Mem-Editor-tp7592537p7592539.html
Sent from the Elecraft mailing list archive at Nabble.com.
_
@mailman.qth.net
Subject: [Elecraft] Writing memories to KX3 via K3 Freq. Mem. Editor?
I am having some trouble getting the K3 Frequency Memory Editor to write, and
read, from the KX3. I installed a 2m module and so far that all seems to be
working fine (have the latest firmware) and now I am looking
I am having some trouble getting the K3 Frequency Memory Editor to write, and
read, from the KX3. I installed a 2m module and so far that all seems to be
working fine (have the latest firmware) and now I am looking to program the
memories via the computer.
The utility connects to the rig on port
Lookin' good
Sent from my Verizon Wireless 4G LTE DROID
tomb18 wrote:
>Oops, forgot the link!
>http://va2fsq.com/wp-content/uploads/W4P3Deluxe.jpg
>
>
>
>--
>View this message in context:
>http://elecraft.365791.n2.nabble.com/Writing-K3-Control-Add-in-for-Windows4P3-and-need-some-advice-tp7571
Oops, forgot the link!
http://va2fsq.com/wp-content/uploads/W4P3Deluxe.jpg
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Writing-K3-Control-Add-in-for-Windows4P3-and-need-some-advice-tp7571812p7572167.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Well, I've made some changes based on a lot of suggestions via email.
This is the new version. Please ignore button sizes and placement, it
hasn't been optimized yet.
The whole thing is about 1/2 way there in terms of programming. One feature
that I'm putting in is the ability to connect directl
I think what will happen here is if you start looking at a competent
remote control program is that all controls would be required at some
point. This includes the Configuration menus. Of the different
programs I have looked at none is 100%, but I probably haven't seen all
that are available.
Ed wrote
> Tom
>
> I would think you will find the VOX on/off and gain controls useful.
> There are some of us that rely on them in remote operation.
>
> Ed
> K6ED
if Vox on/off & gain is included, then please also AntiVox is also a much
needed inclusion. for some reason I have to change the Vo
Tom
I would think you will find the VOX on/off and gain controls useful. There
are some of us that rely on them in remote operation.
I use an "IP Power" switch to control the AC. This gives you the ability to
power up/down the entire station from the remote location. To power up the
K3 I have
Ok...
Looks like almost everything is going to be there...need to buy a 30"monitor
lol
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Writing-K3-Control-Add-in-for-Windows4P3-and-need-some-advice-tp7571812p7571832.html
Sent from the Elecraft mailing list archive at Nabble
Hi,
You may want to consider adding the "Delay" adjustment.
I use mine in CW depending on whether I operate QSK or not.
Of course it also is used to adjust VOX delay I believe.
Also the "Mon" (monitor) function might be of value.
Good Luck
Bill - W0BBI
--
View this message in context:
http://
Hi,
This all started with wanting to add a easy way to change the receive
equalization on the K3 in my Windows4P3 program. But, as I was at it I
thought it might be good to add some additional buttons.
Next thing you know, I decided to put "a lot" of control.
The idea is that this control program
It's not just "tech" writing, but writing in general. I made a (very good)
living as a writer (6 books published, many articles in print) since 1977.
And, the world has changed so much since then. Plus, it's pervasive. I
can't begin to tell you how many CEOs never get past the "executive
summary" i
14 matches
Mail list logo