That's a good question!
I believe that the sub RX is the first priority. You have to be able to hear
his QSX frequency to know you're transmitting in the right place.
The P3 does help to see the signal of the guy who he answered last transmitting.
I was able to work ZL8X on two bands today by u
I recently made the choice to purchase a P3 rather than a KRX3.
Three factors that were involved in my decision were as follows.
It is the 160m DX season and CQ WW is right around the corner. I didn't
want to take my
station apart even for a day or two to add the second Rx. The P3 was up
and
alsopb wrote:
>
> If you want to be even more effective for CW pileups, add and
> SDR/SKIMMER to the subrx IF output. You can see the calls of the
> stations in the pileup on a "band map/waterfall" display. IDing the
> frequency last worked is considerably easier with both KRX-3 audio and
re help on that band as well. APF too!
Dave, N4QS
- Original Message -
From: "Rich - K1HTV"
To: "'Dave Perry'" ;
Sent: Monday, November 22, 2010 8:55 AM
Subject: RE: [Elecraft] ZLX8 - K3 firmware
> FB Dave,
> Having both the KRX3 and P3 sure
re often for busting pileups than I do for just
listening to a quite band.
Dave, N4QS
- Original Message -
From: "Rich - K1HTV"
To: "'Bill VanAlstyne W5WVO'"
Cc:
Sent: Monday, November 22, 2010 6:20 AM
Subject: Re: [Elecraft] ZLX8 - K3 firmware
>
ng you KRX3 vs. P3 decision.
>
> 73,
> Rich - K1HTV
> www.qrz.com/db/k1htv
>
> = = =
>
> -Original Message-
> From: Bill VanAlstyne W5WVO [mailto:w5...@cybermesa.net]
> Subject: Re: [Elecraft] ZLX8 - K3 firmware
>
> ZL8X is running seven (7) stations concurre
= = =
-Original Message-
From: Bill VanAlstyne W5WVO [mailto:w5...@cybermesa.net]
Subject: Re: [Elecraft] ZLX8 - K3 firmware
ZL8X is running seven (7) stations concurrently. See their website:
http://www.kermadec.de/organisation/equipment/index.php
They may be running K3s, but they make no
, November 21, 2010 10:38 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] ZLX8 - K3 firmware
I have the KRX3 and now a habit of chasing CW DX pileups running split
with the MAIN RX in my left ear and the SUB RX in my right ear. I
transmit on the SUB frequency while zero beating the guys he
I have the KRX3 and now a habit of chasing CW DX pileups running split
with the MAIN RX in my left ear and the SUB RX in my right ear. I
transmit on the SUB frequency while zero beating the guys he is working
along the way. This technique works quite well, I highly recommend the
SUB RX. My SUB
I'll confess to not being much of a CW op (only 277 worked) but my recent
experience with entering the realm of either 2nd RX or panadapter usage, I've
gone to the panadapter, and only recently at that.
In my case it's an SDR-IQ running SpectraVue, which interfaces to the K3
flawlessly.
I've n
W2RU - Bud Hippisley wrote:
>
>
> On Nov 21, 2010, at 9:11 PM, Bill W4ZV wrote:
>>
>> See the bottom screen below and note the red dot and 599 by W6XA on
>> 7010.4:
>
>
> Wow! Where did you find a pileup where only one station thought the DX
> had come back to him and was sending a signal r
On Nov 21, 2010, at 9:11 PM, Bill W4ZV wrote:
>
> See the bottom screen below and note the red dot and 599 by W6XA on 7010.4:
Wow! Where did you find a pileup where only one station thought the DX had
come back to him and was sending a signal report?
Bud, W2RU
__
Bill VanAlstyne W5WVO wrote:
>
> To all veteran HF CW DXers -- If I were going to get EITHER a KRX3 or a P3
> to make working split pileups more efficient and productive, WHICH should
> I
> invest in first?
>
Of those two choices, the KRX3. You ears will help you find the station
he's worki
I think the KRX3. The P3 is very helpful, but the most of the time it's the
KRX3 that does
it. The P3 shows the pileup, but it's much easier to identify the one that's
working the
DX when you can hear and copy calls, etc.
I operated with the equivalent of the REV button for years and always th
#x27;Johnny Siu'
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] ZLX8 - K3 firmware
Hi Johnny,
I think you meant ZL8X. I'm sure glad that they are using a K3 on that
Dxpedition to Kermadec. They must have been using it on 160 Meters this
morning
when I worked them. I was running 1
path, as also occurred for my 160M QSO with Dave,
KH2/N2NL a few weeks ago. Thank you Elecraft!
73,
Rich - K1HTV
= = =
-Original Message-
From: Johnny Siu [mailto:vr2...@yahoo.com.hk]
Sent: Saturday, November 20, 2010 19:02 PM
To: Elecraft
Subject: [Elecraft] ZLX8 - K3 firmware
Hello
Hello Group,
K3 is the main radio in ZLX8. Do you know which version of Firmware they are
using?
Yesterday, I hear ZLX8 at 20 metre 59+. I returned to them with my QRP K3,
also
received 59 signal report. My KPA3 is under repair by Elecraft.
cheers,
Johnny VR2XMC
__
17 matches
Mail list logo