I wonder if anyone else has noticed, most of the front panel controls
are disabled during TX?
It's quite annoying during a contest for example, where you could use
that little time to make an adjustment eg. change bandwidth, turn on/off
preamp etc. before the rig returns to RX.
I've never ever
I agree, the K3 certainly does have more RX things locked while
transmitting than my MP, but the MP had some as well.
I seem to recall that this is also true of other software defined
radios like Flex, but others can comment on that. All of the K3
controls are effectively encoders, including
10:07:48 +
From: HA3AUI ha3...@ax.hu
Subject: [Elecraft] disabled controls during TX
To: elecraft@mailman.qth.net
Message-ID: 4bb47074.2060...@ax.hu
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I wonder if anyone else has noticed, most of the front panel
controls
are disabled
On 4/1/2010 3:07 AM, HA3AUI wrote:
I wonder if anyone else has noticed, most of the front panel controls
are disabled during TX?
It's quite annoying during a contest for example, where you could use
that little time to make an adjustment eg. change bandwidth, turn on/off
preamp etc. before
K2VCO
Sent: Thursday, April 01, 2010 7:45 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] disabled controls during TX
On 4/1/2010 3:07 AM, HA3AUI wrote:
I wonder if anyone else has noticed, most of the front panel controls
are disabled during TX?
It's quite annoying during a contest
Even the FT-1000D would not let you change RX filters during XMT.
Rob K6RB
I agree, the K3 certainly does have more RX things locked while
transmitting than my MP, but the MP had some as well.
I seem to recall that this is also true of other software defined
radios like Flex, but others
: k...@baymoon.com
To: Guy Olinger K2AV olin...@bellsouth.net
Cc: elecraft@mailman.qth.net; HA3AUI ha3...@ax.hu
Sent: Thursday, April 01, 2010 9:28 AM
Subject: Re: [Elecraft] disabled controls during TX
Even the FT-1000D would not let you change RX filters during XMT.
Rob K6RB
I agree, the K3
Thanks for all the answers, it's reassuring to know that at least, the
problem is already known.
For those, who write that the K3 cannot check the front panel due to TX
overhead issues, I don't think there is more processing power needed
during TX, instead, I think it's RX that is more process
There are changes starting to take place in this area. At the moment
with the most recently released firmware you can turn the RX antenna
on and off while transmitting. I'm sure that was a test case to prove
that things work as they should. You'll start to get more and more
opened up to you
9 matches
Mail list logo
