Boy the firmware changes keep coming and coming even before I can load the
previous beta a new one arrives.
I would like to make a firmware change request. Several times while in the
Data A mode I have accidently hit the M1 button where I have a voice message
of my call stored. Of course befo
The "1" switch on the number pad switches from vfo a to b.
Could the switch tone function be changed such that it gives an indication
of which vfo? i.e. low tone for A, and High for B?
This would be very helpful for setting splits.
__
Gulio,
part of this behavior - KEY OUT is as copy of key nor PTT OUT is well
known and was several times discussed. Key Out is activated by Key
hitting even you are in PTT mode and no PTT signal (or VOX) is active.
(see http://www.zerobeat.net/smf/index.php?topic=215.0 with comments
related to t
Giulio Pico - IW3HVB ha scritto:
> We use a foot switch to drive the sequencer and the radio PTT is
> controlled via the external PTT socket.
I've noticed another couple of issues regarding CW this time.
Squeezing the paddles (or using only dots or dashes, doesn't matters)
with no external
;From: "David Pratt"
>To: "Andrew Faber"
>Cc: "Giulio Pico - IW3HVB" ;
>Sent: Saturday, February 07, 2009 1:48 AM
>Subject: Re: [Elecraft] Firmware request
>
>
>> In a recent message, Andrew Faber wrote ...
>>>
>>>I like thi
- Original Message -
From: "David Pratt"
To: "Andrew Faber"
Cc: "Giulio Pico - IW3HVB" ;
Sent: Saturday, February 07, 2009 1:48 AM
Subject: Re: [Elecraft] Firmware request
> In a recent message, Andrew Faber wrote ...
>>
>>I like this idea a
It's a good point you make David. We have both mentioned that it would be
good for the firmware to turn MON on (if it isn't on already) during the
transmission of a recorded message, whether from M1-8 or AF Play. Also,
Andy, as far as stopping tx under computer control is concerned, at present
In a recent message, Andrew Faber wrote ...
>
>I like this idea also. But then we also would need some way of knowing when
>a message finishes. For example, under computer control, if I send a TX
>command to go into TX mode, then a command to start playing a message, the
>radio has to let me kno
To:
Sent: Friday, February 06, 2009 2:46 PM
Subject: [Elecraft] Firmware request
> I've noticed one possible issue using the KDVR3, wich I've installed
> today.
> The PTT is controlled directly by the radio, so basically when you go
> for playback the radio goes on TX automa
I've noticed one possible issue using the KDVR3, wich I've installed today.
The PTT is controlled directly by the radio, so basically when you go
for playback the radio goes on TX automatically.
This is a problem for us, cause on our VHF station we deal with an
external sequencer who manage to do
; From: wrco...@flash.net> Subject: Re: [Elecraft] Firmware Request all
rigs> To: kev...@cs.unm.edu; elecraft@mailman.qth.net> CC:>> Kevin, just enter
the CQWW-CW or the ARRL DXCW. Every contact will be 599 whether they can hear
you or not!>> Willis 'Cookie' Cooke&
Kevin, just enter the CQWW-CW or the ARRL DXCW. Every contact will be 599
whether they can hear you or not!
Willis 'Cookie' Cooke
K5EWJ
--- On Mon, 12/22/08, Kevin Rock wrote:
> From: Kevin Rock
> Subject: [Elecraft] Firmware Request all rigs
> To: "elecraft@
Dear Santa,
I have a firmware request for my Elecraft rigs: please Santa could you add a
button so I can improve propagation. A few 599 signal reports would fit nicely
in my stocking and look really nice in my logs. I have been good this year
Santa, you can ask anyone. Please, please, plea
The other method with AUXBUS almost works.
The new firmware has a "compatibility mode" added to the KRC2 config menu of
the K3. This should make the KRC2 show up as 10m or 60m on 6m. It actually
shows up as 160m with my system. So, as long as we don't mind 160m mapping
to 6m that is a solution. B
Mike,
For use with the K3 serial port, put in the jumpers for a thru
connection on pins 4 and 6 so any computer application you may want to
use can have access to these K3 serial port pins for PTT and keying.
73,
Don W3FPR
AD6XY wrote:
That might work! Presumably the other features of the K
That might work! Presumably the other features of the KRC2 would not work
without also having the auxbus connected - not a big loss for me. It is
something I will try as it is only going to need a 9-way serial cable with
pins 4 & 6 disconnected via W16 and W20 just in case.
Considering all the ot
Mike,
I have been looking at the KRC2 manual and was reminded that the KRC2
can use serial band decoding. You might want to try it because it seems
to be the easiest (but I am still unsure about the 6 meters/60 meters
decoding.
You will have to set the K3 (and any logging/computer control
Mike,
Try it using the AUXBUS control before connecting the BAND0-3 outputs
from the ACC connector.
If I recall, the AUXBUS control will also activate the 60 meter KRC2
output when 6 meters is selected on the K3.
Even if my memory is incorrect, it is worth a try, it is an easy matter
to conn
That is a very good idea Joe.
I will try but it will need pull up resistors fitting in the KRC2. Also
because I use transverters I will have to solder 4 more wires and it will
need two multicore cables soldering onto that 15 way din and that is very
difficult because of the size with a connector
y, August 30, 2008 10:20 AM
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] Firmware request KRC2
>
>
>
> I wonder if it is possible to make the K3 "lie" to the KRC2
> that 50 MHz is via a transverter? This would help my
> switching problem and I think migh
I wonder if it is possible to make the K3 "lie" to the KRC2 that 50 MHz is
via a transverter? This would help my switching problem and I think might be
of general use to those upgrading from K2+XV50 to K3.
Mike
--
View this message in context:
http://n2.nabble.com/Firmware-request-KRC2-tp794078
21 matches
Mail list logo
