That is not the right solution, especially if one wants to use their computer's
sound card for it's designated duties.
I have a SignalLink and it was the easiest set up I've done for digital modes.
Features I like that sound cards don't have...
1. Old fashioned Power on/off button
2. LED PTT In
On Mon, Apr 23, 2012 at 10:57 PM, KC6CNN wrote:
> ...I have a Elecraft K3 and it is hooked up to a signalink.
Take the Signalink out of the system. It adds nothing and something about
its setup could be the problem.
It's easy to do: just remove it and run the cables that went t
Gerald,
That is great news, have fun and make lots of contacts.
73,
Don W3FPR
On 4/24/2012 1:17 AM, KC6CNN wrote:
> You Are the Man DON.
> Changed Jumper jp4 and got alc movement.
> Set it to 4 bars solid and the fith just blinking and got alc movement.
>
>
> Now to make a psk contact.
>
> Thank
Gerald,
Make *sure* you follow Tigertronic's setup procedures for the
SignaLink. Pay special attention to the part about audio levels both
input and output.
For my SignaLink, my MIC gain is about 29 and LIN OUT is about 10 (it
may vary from rig to rig). Compression is 0 (or off), but I *thin
You Are the Man DON.
Changed Jumper jp4 and got alc movement.
Set it to 4 bars solid and the fith just blinking and got alc movement.
Now to make a psk contact.
Thank all of you for your help.
Gerald - KC6CNN
--
View this message in context:
http://elecraft.365791.n2.nabble.com/what-am-I
Gerald,
Your SignaLink by default is plugged for Mic level output - and if you
have the SignaLink line out cable connected to the K3 Line-in, you need
to change a jumper to increase the audio out to line level (see the
SignaLink instructions). Currently, you do not have enough audio coming
in
Ok, Let me start again, but this time from the computer.
I have a Elecraft K3 and it is hooked up to a signalink. Going to my lap top
which is running a older version of HRD. I decode PSK31 fine business. I am
putting out about 25 watts and have yet to make a contact. I did name a
contact on CW, b
Data A is the proper sub-mode for PSK31.
Do you have your audio level set correctly? Compression should be zero, but
Increase the audio until you see 4 bars illuminated with the 5th bar
flickering on the ALC scale.
Use the power knob to set the desired power level.
With the K2, K3 and KX3, ignore
OK. You're using the K3 set to DATA - DATA A mode. So far so good.
How is the rig connected to your computer? Directly or through an
interface? How are you keying the rig? This sounds like the big
question here. Are you using VOX, DTR/RTS, or direct COM port keying?
What software are yo
Gerald,
Are you using a digital mode program or trying to use psk direct from the
radio? If software, what program?
73
Greg
AB7R
On Apr 23, 2012 6:08 PM, "Gerald Manthey" wrote:
> No problem and I decode them fine.
> On Apr 23, 2012 8:07 PM, "Jim Dunstan" wrote:
>
> > At 05:30 PM 4/23/2012 -
No problem and I decode them fine.
On Apr 23, 2012 8:07 PM, "Jim Dunstan" wrote:
> At 05:30 PM 4/23/2012 -0700, you wrote:
>
> Hi
>
> First thing is to listen in to PSK conversations. I assume you have no
> problem hearing PSK signals.
>
> Jim, VE3CI
>
> _
At 05:30 PM 4/23/2012 -0700, you wrote:
Hi
First thing is to listen in to PSK conversations. I assume you have no
problem hearing PSK signals.
Jim, VE3CI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Using K3. I'm using data a for mode. Is that maybe the problem?
On Apr 23, 2012 7:30 PM, "Matt Zilmer" wrote:
> Are you using PSK31 "normal" frequencies? You can find these at
> http://www.podxs070.com/common-psk31-operating-frequencies.
> There is a good explanation about why these common frequ
Are you using PSK31 "normal" frequencies? You can find these at
http://www.podxs070.com/common-psk31-operating-frequencies.
There is a good explanation about why these common frequencies are
best to use for trying to make PSK31 contacts.
If you can't get anyone else by CQing, drop me a line at th
What rig type?
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
K3 #281, P3 #688
HRD v5.x/6.0 Test Team
On 4/23/2012 7:58 PM, KC6CNN wrote:
> I have been trying to make a contact in psk31 mode for two weeks. I have not
> had any luck. Settings are good on software. Signalink works
I have been trying to make a contact in psk31 mode for two weeks. I have not
had any luck. Settings are good on software. Signalink works had a CW
contact with it. But call CQ and answer cq's and both luck on 20 , 30, or 40
meters.
Is there anyone who experienced this and located a problem. I'm st
16 matches
Mail list logo