No one mentioned it, but if you already have a linear amp, you could
drive it with the 10W model to a reasonable output. If money is a
real problem, it's a way of getting a great radio for even less money.
73, doug
___
Elecraft mailing list
Post to: Ele
What configuration are you ordering?
Bob Serwy - N9RS
_
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of James Young
Sent: Wednesday, October 08, 2008 11:18 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 Initial Configuration - THANKS AND VERY 73 TO ALL WHO
TO
Just to add my voice to the choir, go for the K3/100 kit with the stock filter.
If the budget allows, the KAT3 antenna tuner is the best I've used. If for
some reason you are not happy with it after a couple of months (impossible!),
you can sell it for what you have in or even a little more s
Just to add my voice to the choir, go for the K3/100 kit with the stock filter.
If the budget allows, the KAT3 antenna tuner is the best I've used. If for
some reason you are not happy with it after a couple of months (impossible!),
you can sell it for what you have in or even a little more s
ing the stock
SSB filter.
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Don Wilhelm
> Sent: Tuesday, October 07, 2008 3:43 PM
> To: James Young
> Cc: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3 Initial Conf
Hi James,
The basic K3 with no options is a fantastic value.
You will save a couple hundred dollars by assembling it your self. No
electronic assembly, just a lot of screws. The mantra is read the
assembly manual, and follow the manual exactly. Elecraft manuals are
far better than others I
James,
You can order the basic K3/10 and it will do all modes. All the options
can be added later, so you can get your feet wet with the basic K3 while
deciding what else you will need for your operating preferences. The
stock filter will work just fine as long as you are not into working on
James Young wrote:
Thanks, in advance for your help! I apologize if this question has
been asked before, but here goes.
What would be the least expensive initial configuration for a new
(factory assembled) K3? My operating preference is SSB, but I may try
some of the digital modes at some poin
The Base K3 comes fully equipped to do what you wish at 10 watts power. Opt
for the 100-watt version if you need the power. The included roofing filter
will work on all modes for reception; if you want to transmit AM or FM, you
will need the corresponding AM/FM roofing filter. All other trans
Hello James!
What would be the least expensive initial configuration for a new
(factory assembled) K3? My operating preference is SSB, but I may try
some of the digital modes at some point.
Either the basic 10W unit, or the basic 100W unit will get you on the
air. Just add an antenna, power s
10 matches
Mail list logo
