You probably need to open up the XV and look at how it was set up ..
jumpers move around depending on whether it's used with Elecraft or
foreign equipment, different attenuators, etc
Is the transverter power control working? e.g. if you select the band
on K2 does the XV light up?
If it's all set
Ron,
The 6 meter antenna connects directly to the XV50.
Since you have the K60XV, set up the XV50 for 1 mW input power, and set
it as TRN1 (or 2 or 3 or 4, your choice) with the dip switches in the
XV50. Also set it for split TX/RX IF cables. The K2 TRNx selection
should match the DIP
Don: I have the dip switches and the shorting blocks correctly set in the XV50,
but I don't see the following in the K2 menu. This is from your e-mail: Also
set it for split TX/RX IF cables. The K2 TRNx selection
should match the DIP switch settings in the XV50. Is this done inside the K2
3 matches
Mail list logo