[PSES] MID (Measuring Instruments Directive) Notified Body?

2017-09-12 Thread Mike Sherman
Hello again, colleagues: I'm looking for a MID notified body to do "B+D" conformity assessments for Annex VII liquid dispense meters. Please respond directly to me if you're interested or if you can point me towards someone who might be interested. Thanks! Mike Sherman Graco Inc.

[PSES] Fwd: International RF Regulatory Engineer opening at gogo Commercial Aviation

2017-09-12 Thread Dave Heald
Forwarding for Mark Luksich at gogo... gogo Commercial Aviation has a job opening for an International RF Regulatory Engineer. *Key Responsibilities:* - Working with regulatory and/or legal staff, analyze rules and regulations to determine technical compliance requirements for licensing

[PSES] International RF Regulatory Engineer opening at gogo Commercial Aviation

2017-09-12 Thread Dave Heald
Forwarding for Mark Luksich at gogo... gogo Commercial Aviation has a job opening for an International RF Regulatory Engineer. *Key Responsibilities:* - Working with regulatory and/or legal staff, analyze rules and regulations to determine technical compliance requirements for licensing

Re: [PSES] EN 62368-1:2014 DoW

2017-09-12 Thread Ralph McDiarmid
Gee, and I thought SDOs like UL and CSA were the only ones with issues. ;^)) Ralph McDiarmid Product Compliance Engineering Solar Business Schneider Electric From: John Woodgate [mailto:jmw1...@btinternet.com] Sent: Monday, September 11, 2017 2:34 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject:

Re: [PSES] Why higher value for DC in SELV - Electrical Shock Safety Criteria"

2017-09-12 Thread Pete Perkins
Mick, et al, Thanx for finding this archive which represents a substantial portion of work by modern researchers in electric shock. This symposium in 1983 was the first international electric shock meeting for quite a long time. It was well attended by many researchers

Re: [PSES] DoW of EN 60601-1 A1

2017-09-12 Thread John Woodgate
I don't know, but it's very likely. The management of the OJ lists is still in deep trouble. With best wishes DESIGN IT IN! OOO - Own Opinions Only www.jmwa.demon.co.uk J M Woodgate and Associates Rayleigh England UK is a sovereignty, not a Zollverein-ty From:

[PSES] DoW of EN 60601-1 A1

2017-09-12 Thread Boštjan Glavič
Dear experts, Is anyone familiar why we have different DoW for EN 60601-1/A1 on cenelec web page and inside OJEU. Cenelec says 2018-12-24, while europa.eu (list of MDD harmonized standards) 2017-12-31. This is critical situation for manufacturers. Is it the same issue as with EN 62368-1-->

Re: [PSES] LISN Calibration Measurement Uncertainty

2017-09-12 Thread Ken Javor
There shouldn't be a lower impedance issue, because from 150 kHz up the LISN is very close to 50 ohms. And once the LISN coil impedance is well above 50 ohms, the measured LISN impedance should be 50 ohms in parallel with the bleeder resistor, which is essentially 50 ohms. The only affect is if

Re: [PSES] LISN Calibration Measurement Uncertainty

2017-09-12 Thread T.Sato
On Mon, 11 Sep 2017 16:32:09 +, Mac Elliott <0a115b29e815-dmarc-requ...@ieee.org> wrote: > We are interested in doing some in-house LISN calibrations (impedance > verification only using network analyzer) and need to develop an uncertainty > budget.  > Does anyone happen to have a

Re: [PSES] EN 62368-1:2014 DoW

2017-09-12 Thread Boštjan Glavič
Hello Ian, I have not been informed about it. If you check linked-in, UL is advertising count-down till DoW for EN 60065:2014. Best regards, Bostjan From: McBurney, Ian [mailto:ian.mcbur...@allen-heath.com] Sent: Monday, September 11, 2017 11:23 AM To: Boštjan Glavič ;

Re: [PSES] LISN Calibration Measurement Uncertainty

2017-09-12 Thread John Woodgate
I'm afraid that one cannot assume that our ancestors were either all-knowing or idiots. They were people, just like us, and they got it right mostly, but not always. With best wishes DESIGN IT IN! OOO - Own Opinions Only www.jmwa.demon.co.uk J M Woodgate and Associates Rayleigh England UK is a