AW: D of C for medical P.S.

for a medical components. With best regards Horst Haug INNOVA Product Service GmbH Ampferweg 6 Germany 87677 Stottwang Tel: (49) 8345-952727 Von: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]Im Auftrag von Jon Griver Gesendet: Mittwoch, 26. Februar 2003 09:39 An

AW: Blower Motor w/ European approval

Dear Brian, most European approval agencies accept an CSA approved blower also for Europe. It means, that the f - fammability - motor blocking - motor overlaod is checked already. For CE-mark (= self declaration) above is sufficient. With best regards Horst INNOVA Product Service GmbH Ampferw

AW: UL1950 Expiration Dates

This is a multi-part message in MIME format. Memo is in German, but it contains a sheet with the expiration dates. INNOVA Product Service GmbH Ampferweg 6 Germany 87677 Stöttwang Tel: (49) 8345-952727 Von: owner-emc-p...@majordomo.ieee.org mailto:owner-emc-p...@majordomo.ieee.org]Im Auftrag

Battery Loader for South Africa

For a battery loader for the use with toys we would do approval to IEC60335-2-29 in Europe. Is there a similar standard for South Africa and is a mark required or the CE-mark sufficient for this country? Thank you in advance for the answers. Horst Haug INNOVA Product Service GmbH Ampferweg 6

AW: INNOVA Product Service GmbH

. With best regards Horst Haug INNOVA Product Service GmbH Ampferweg 6 Germany 87677 Stöttwang Tel: 49-8345-952727 Fax: 49-8345-952729. -Ursprüngliche Nachricht- Von: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]Im Auftrag von MCA Compliance Gesendet

Three phase delta system in USA

I also learned, that there is a three-phase delta system in USA with 500 Vac per phase. One phase (L3) is earthed. Is this system very often used in USA? Is it correct information, that L3 is always earthed and not L1 or L2. Horst Haug -Ursprüngliche Nachricht- Von: owner-emc-p

AW: Power supply markings

George, There is no CB-scheme mark like a UL, GS or other "marks". Nevertheless, several European power Supply manufacturers write CB-scheme on their type label, indicating, that they have done a CB-scheme certification. It is just good information for the customer. Horst -Ursprüngliche N

AW: Define Continuous DC Voltage

Enclosed are results of a SELV reliability test. The output inductance was shorted with no load and the ripple increased. In 1.2.13.4 (IEC60950) DC voltage is defined as a voltage with a peak to peak value less 10 % of the DC voltage. In the enclosed file you see the ripple with Peak 49,6 Vpmax an

AW: Insulated Electrolytic Capacitors

Peter, my experience is, that you will not receive a statement from the manufacturer of the capacitor about the foil around the cap. This would be required to proof, that it is good for basic insulation. Our company (we are a GS-mark certification body) does not accept the foil around a capacito

AW: UL vs CSA (IT product)

a separate EMAIL. With best regards Horst Haug -Ursprüngliche Nachricht- Von: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]Im Auftrag von Peter Merguerian Gesendet: Montag, 10. September 2001 09:44 An: 'am...@westin.org'; emc-p...@majordomo.ieee.org Be

AW: Stuck in Germany!

Peter, the initial and most important point would be to define the appropriate European standard. I do not know exact what luminaries you are using for your ballast for, but EN61046 “DC or AC supplied electronic step-down converter for filament lamps” might be appropriate. To your questions: PCB

AW: AC Adapters in Australia

Richard, one of my clients require approval for Australia. (C-tick mark). My understanding is, that I have to send the sample to Australia for approval. Do you know the adress of the appropriate department, organisation? Thank you in advance Horst Haug -Ursprüngliche Nachricht- Von

Vortrag 16.Nov. 14.00

dies so für alle akzeptabel ? Wenn schon Fragen bestehen, dann bitte diese per EMAIL weiterleiten an uns. Dann können wir uns vorbereiten. Viele Grüße Horst Haug --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc

Re: UL 508 C

RE: UL 508 CHi Rafael, most companies in Europe approve their equipment to UL508-c, CSA22.2-14, EN50178. I have a report format for EN50178. Let me know, if this would be af any help for you. With best regards H.Haug - Original Message - From: Kazimier Gawrzyjal To: 'Rafael G

Re: EN 61000-3-2 (Harmonics standard)

Enclosed to this EMAIL is prA14 of the standard. My understanding is: - the standard EN61000-3-2 will be valid 1.Januar.2001 - the amendment A14, which is very important will be valid highly probably 1. July.2001 - test houses might apply the new coming A14 for the time between 1.January.2001 an

Re: IEC601-1-2 and harmonic correction

rtion (paragraph 36.201.2.1). Is this still correct today? Are there plans to incorporate this requirement in the future? * Dipl.-Ing. (FH) Horst Haug INTERTest Systems GmbH Produktsiche

Re: Help On Turkey Safety Req.

ments. Perhaps requirements for line harmonics or PFC? Any Help would be greatly appreciated. Andy Garcia South Florida Data Services * Dipl.-Ing. (FH) Horst Haug INTERTest Systems GmbH Pr

Re: Re: Measuring AC

to the measurement circuit. Please read also 2.2.8.2 IEC950 as a guideline, how you could bridge reinforced isolation Primary to SELV by resistors !! regards Horst * Dipl.-Ing. (FH) Horst Haug INTERTest