If the multi-string controllers are switched-mode, then we have the RFI
problem again.
Or, can the switching frequency be set to 500 Hz, so the 10th harmonic
becomes 5 kHz which is below 9 kHz ?
twisting the wires will also help for the frequency range 9 kHz to 30 MHz.
Rene Charton
, March 01, 2013 3:19 PM
Aan: emc-p...@ieee.org
Onderwerp: Re: LED Chamber Lighting - drivers outside the chamber
You need a constant-current source; how about an adjustable 3 terminal
regulator set up as one?
Cortland Richmond
On 3/1/2013 0900, Rene Charton/Twn/TUV wrote:
> ...ideas to genera
Has anyone tried the following:
- disassemble the LED lamps and separate the LED portion from the Driver
Portion
- put a filter at the point of entry into the chamber
- Have the LED portion in the chamber, and the driver circuits outside the
chamber.
==
second try:
- op
I will be out of the office starting 11/28/2012 and will not return until
11/30/2012.
I will have very limited access to my e-mail,
therefore please contact my deputy:
arvin...@twn.tuv.com
-
This message is from the IEEE Product Sa
I will be out of the office starting 11/27/2012 and will not return until
11/28/2012.
I will have very limited access to my e-mail,
therefore please contact my deputy:
arvin...@twn.tuv.com
-
This message is from the IEEE Product Sa
I will be out of the office starting 11/22/2012 and will not return until
11/23/2012.
I will have very limited access to my e-mail,
therefore please contact my deputy:
arvin...@twn.tuv.com
-
This message is from the IEEE Product Sa
I will be out of the office starting 10/18/2012 and will not return until
10/24/2012.
I will have no access to my e-mail,
therefore please contact my deputy:
arvin...@twn.tuv.com
-
This message is from the IEEE Product Safety Engin
I will be out of the office starting 07/19/2012 and will not return until
07/20/2012.
I will have very limited access to my e-mail,
therefore please contact my deputies:
For Project related issues: arvin...@twn.tuv.com
For general issues: thomas.be...@twn.tuv.com
-
--
I will be out of the office starting 07/03/2012 and will not return until
07/05/2012.
I will have very limited access to my e-mail,
therefore please contact my deputies:
For Project related issues: arvin...@twn.tuv.com
For general issues: thomas.be...@twn.tuv.com
-
--
I will be out of the office starting 05/24/2012 and will not return until
05/25/2012.
I will have no access to my e-mail,
therefore please contact my deputies:
For Project related issues: arvin...@twn.tuv.com
For general issues: thomas.be...@twn.tuv.com
-
I will be out of the office starting 05/17/2012 and will not return until
05/18/2012.
I will have no access to my e-mail,
therefore please contact my deputies:
For Project related issues: arvin...@twn.tuv.com
For general issues: thomas.be...@twn.tuv.com
-
I will be out of the office starting 03/14/2012 and will not return until
04/12/2012.
I will have very limited access to my e-mail,
therefore preferably please contact my deputies:
For FCC/Canada and EU-Notified Body: arvin...@twn.tuv.com
For Telecom International Approvals: jane.p...@twn.tuv.com
I think conducted measurements would not be helpful anyway, because in this
case the use of a conservative antenna gain value is required.
(see page 8 of 558074 D01 DTS Meas Guidance v01)
Kind regards
Rene
No, I think UL has a point here.
As you can see from the Video that Turkey fryer is Gas fired, so there is
always a ingnition source present.
As far as I recall Deep Fat Fryers for home use in Europe:
- are electrically heated, with the heat source inside and protected by an
outside enclosure tha
14 matches
Mail list logo