[PSES] UK plug adaptors with fuse?

adapters have an 5x20 IEC fuse some have thermo fuses and many have no fuse at all. Do I overlook some exceptions or new requirements, that allows adaptors without BS fuse, or are they all just "normal" Asian low quality? Med venlig hilsen / Best regards, Kim Boll Jensen Bolls Aps 2

[PSES] UKCA importer/ representative

some one point me to some official web pages that makes it clear when we need an importer/ representative company with address in the UK? Med venlig hilsen / Best regards, Kim Boll Jensen Bolls Aps 22 99 69 91 - This message

[PSES] Calibartion SW

Hi all We need to upgrade to a better system for calibration handling, but are not interested in complex SW solutions, just like an improved Excel :-) Can anyone recommend such a SW? Med venlig hilsen/Kind regards Kim Boll Jensen Bolls Aps Ved Gadekæret 11F DK-3660 Stenløse

[PSES] personel lifting equipment

Hi I have trouble finding requirements for a baby cradle rocker. The rocker is at the same time the cradle fixing. The rocker have 2 hooks one for hanging it from eg. a hook in sealing and the other hook is used to hang the cradle on. (The cradle is made mostly of fabric and is CE marked).

[PSES] God is good in EMC practice??

Sorry for lifting EMC up to a higher level, but some times I really need to get the devil out of the measurements :-) Have a nice weekend Kim Boll - This message is from the IEEE Product Safety Engineering Society emc-pstc

[PSES] God EMC practice

tions and for many years ago VDE did have some rules like that. Does anyone have some good references on this subject? Best regards, Mr. Kim Boll Jensen - This message is from the IEEE Product Safety Engineering Societ

[PSES] Inrush Current

fter each other such as ringing wave form? Best regards, Kim Boll Jensen - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to

[PSES] CE of battery equipment (Li-ion)

Hi all Regarding especially Li-ion batteries and rechargeable batteries in general. Battery equipment is not directly under LVD, but under 2001/95/EC General Product Safety directive we have EN 60950 and EN 60065, which includes safety of batteries, for some products but also excludes among

[PSES] Vietman approvals

Hi all Does anyone have a good link to some English version of the QCVN 4 list of mandatory regulation for EEE or just some guide lines for type approval regulation on EE in Vietnam? Best regards, Kim Boll - This message

[PSES] Installations in France

outlets each with a mains power cord or can  a 24 outlet be used. I think that the following standard could give me the answer but I can only find the standard NF C 61-314 and NF C 15 100 in French. Can someone help me closer to an answer? Best regards, Mr. Kim Boll Jensen

[PSES] SV: [PSES] New EU marine directive

...@jmwa.demon.co.uk] Sendt: 9. januar 2015 10:49 Til: EMC-PSTC@LISTSERV.IEEE.ORG Emne: Re: [PSES] New EU marine directive In message <005001d02bef$3f10fb40$bd32f1c0$@dk>, dated Fri, 9 Jan 2015, Kim Boll Jensen writes: >The old directive 96/98/EU with amendments will be changed into >2

[PSES] New EU marine directive

;-) Best regards, Mr. Kim Boll jensen - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are

[PSES] BS 1363 design

that den design is not restricted. But how do I understand the R15 min. The manufacturer does not have R15 at all, but comply with the R9.5 around mains pins. Is there any good guide for the layout or are you free to reduce the housing around the ISOD pin? Beat regards, Mr. Kim Boll Jensen

[PSES] SV: [PSES] UK plug

le of years that did not comply with the BS 1363. So my concern is to find the right parts of BS 1363 or a separate standard that addresses the plug of a wall-plug type equipment. Best regards, Mr. Kim Boll Jensen -Oprindelig meddelelse- Fra: Boštjan Glavič [mailto:bostjan.gla...@siq.si]

[PSES] UK plug

. Kim Boll Jensen Bolls Aps Ved Gadekæret 11F DK-3660 Stenløse Phone: +45 48 18 35 66 k...@bolls.dk www.bolls.dk - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a

[PSES] HF HV medical test equipment

standard product and a local transformer manufacturer could not make one for me. (the primary impedance shall be higher than normal) Where can I get a tester or a transformer? Best regards Mr. Kim Boll Jensen Bolls Aps Ved Gadekæret 11F DK-3660 Stenløse Phone: +45 48 18 35 66 k

[PSES] Length of coiled cables

, Mr. Kim Boll Jensen Bolls Aps Ved Gadekæret 11F DK-3660 Stenløse Phone: +45 48 18 35 66 k...@bolls.dk www.bolls.dk - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To

[PSES] field meter

. Kim Boll Jensen Bolls Aps Ved Gadekæret 11F DK-3660 Stenløse Phone: +45 48 18 35 66 k...@bolls.dk www.bolls.dk - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a

[PSES] SV: Laboratory Equipment - the forgotten child

. I have put a big effort into finding a good way around EN 60204 but I get caught by EU guidelines and annexes in the standards. There must be other companies with the same problem. What do they do? Best regards, Mr. Kim Boll Jensen Bolls Aps Ved Gadekæret 11F DK-3660 Stenløse

[PSES] Construction directive/regulation in EU

o all products require the use of a NB? Is there issued a guide on this regulations Best regards, Mr. Kim Boll Jensen Bolls Aps Ved Gadekæret 11F DK-3660 Stenløse Phone: +45 48 18 35 66 k...@bolls.dk www.bol

[PSES] A Machine or not A Machine!

measuring instrument, but how would US and Canada look at the transportation system? Best regards, Mr. Kim Boll Jensen Bolls Aps Ved Gadekæret 11F DK-3660 Stenløse Phone: +45 48 18 35 66 k...@bolls.dk www.bolls.dk

[PSES] SV: Power adapter change from ITE to Medical.

connected medical devices shall be designed. It is absolutly best to make it float, when looking at medical electrical safety. Best regards, Mr. Kim Boll Jensen Bolls Aps Denmark Fra: emc-p...@ieee.org [emc-p...@ieee.org] På vegne af Rick Linford [rlinf

[PSES] EN 60601-1 3ed seminar

HELP I’m trying to find a good and solid EN 60601-1 3 ed seminar here in EU, but all seminars I can find is held in the US. Can anyone help me? Don’t misunderstand me, I like the US, but it more convenient for a Dane to go around in EU ;-) Best regards, Mr. Kim Boll Jensen Bolls

[PSES] SV: 61000-4-2 3rd edition

Hi I think Patty is very correct here. The requirements in 61000-4-2 can be whatever they want, it is a “how to test” standard. The product standard (here 60601-1-2 and -2-xx) is the standard that sets the actual requirements. Best regards, Mr. Kim Boll Jensen Bolls Aps Ved

[PSES] Green multi conductor wire

green and yellow colour. Colours of neutral and POWER SUPPLY CORD conductors shall be in accordance with the Canadian Electrical Code (CEC), Part I, CSA C22.2 No. 21, and CSA C22.2 No. 49. Can we use green on a mulit-wire cable? Best regards, Mr. Kim Boll Jensen Bolls Aps Ved Gadekæret

automotive environmental testing

Hi Does anyone know where I can find standards/requirements for vibration test of equipment for mounting in autos especially in EU. Best regards, Mr. Kim Boll Jensen Bolls Rådgivning Ved Gadekæret 11F DK-3660 Stenløse Denmark T: +45 48 18 35 66 F: +45 48 18 35 30 k...@bolls.dk www.bolls.dk

UL flammability marking

Hi all I have been told that the UL marking on PCB (UR 94V-0 etc.) can also be something like E4. Does anyone know if the marking requirements have been changed and if so where I can get more information. Best regards, Mr. Kim Boll Jensen Bolls Rådgivning Ved Gadekæret 11F DK-3660 Stenløse

Rostest test requirements

Hi all Can someone tell me what the test requirements are for Rostest for lab equipment. We have the electrical safety part OK, but what about clima and vibration and EMC. Where can I find specific data on standards and if accredited test are required. Best regards, Mr. Kim Boll Jensen Bolls

Vibration equipment

re) Best regards, Mr. Kim Boll Jensen Bolls Rådgivning Ved Gadekæret 11F DK-3660 Stenløse Denmark T: +45 48 18 35 66 F: +45 48 18 35 30 k...@bolls.dk www.bolls.dk - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list.Website: http://www.ieee-pses.org/

SV: Denmark AC outlets

t-current protected such that if a Shuko > plug is used and there is a mains to chassis fault, persons will be > protected? > > Richard Woods > Sensormatic Electronics > Tyco International > > > > -Original Message- > From: Kim Boll Jensen [mailto:k...@bolls.dk

SV: Denmark AC outlets

plugs. 4. Some product standards have national deviations which requires a warning on Schuko connector that the installation shall have a fault current circuit or a correct grounding plug shall be fitted. Best regards, Kim Boll Jensen Bolls Raadgivning Denmark Fra: owner-emc-p

Chemicals in test equipment

h are restricted. This concerns the following stages: selling/exporting the sticks using the sticks in the equipment waste The product will be sold in EU and US/Canada. A good web page with information would be great, but also a good consultant could be used or any other help. Best regards, Kim Boll J

SV: FCC part 15 verification

is an Unintentional radiator, the product is thereby under Verification ( see 15.101 other devices). Best regards, Kim Boll Jensen Bolls Rådgivning Denmark Fra: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]På vegne af Colgan Christopher [Soundcraft UK] Sendt: 2

Medical devices

Hi all Can some one send me a copy of CCA 227-7 Rotine tests for medical equipment, or point me to a downloadeable fil. Best regards, Kim Boll Jensen Bolls Rådgivning Hyacintvej 6 DK-3660 Stenløse Tlf.: 48 18 35 66 Fax: 48 18 35 30 Mobil: 22 99 69 91 E-mail: k...@bolls.dk web

FDA registration of laser

when not to register. (The drives are Class I but includes a higher laser internally as fare as I know) Best regards, Kim Boll Jensen Bolls Raadgivning Denmark Title: FDA registration of laser Hi all good people Just a simple question. When using a CD or DVD driver in a product (PC or

Argicultural machines

This is a multi-part message in MIME format. Hi all Does any one know of other EMC requirements or other coming requirements for agricultural machines than EN ISO 14982. Best regards, Kim Boll Jensen Bolls Raadgivning Denmark Title: Argicultural machines Hi all Does any one know of

In-vitro

2 which are EMC requirements BUT, BUT, BUT the document OJ C 319 does NOT include 98/79 in its heading, and this list of standards is not included on the list on the above web page. What is the right approach ? Best regards, Kim Boll Jensen Bolls Raadgivning Title: In-vitro Hi all I

Cutter

only under Machinery and EMC directive, but the customer wants also Low voltage directive to be fulfilled. Can someone please help me to find the right standards. I have some idea but I'm not sure. Best regards, Kim Boll Jensen Bolls, Denmark Title: Cutter Hi all I have a product w

Re: Safety Requrement for wireless component in vehicle.

o the R&TTE directive 99/5/EC. Best regards, Kim Boll Jensen Bolls Raadgivning Denmark k...@bolls.dk www.bolls.dk Cheng-Wee Lai skriver: > Dear All, > > Automotive safety is not my field but I have come across this device that > are maybe some of you can give me some input. &

Re: 60950 clauses

Dear Brian Please indicate where in the standard these references are made, because it could be that they should have referred to another clause which exist. Best regards, Kim Boll Jensen Bolls Raadgivning Denmark www.bolls.dk boconn...@t-yuden.com skriver: > > > The index of my c

Bluetooth in Israel, Brazil, Argentina and India

k you very much. Best regards, Kim Boll Jensen Bolls Raadgivning Denmark <>

South Africa and SRD

t any national web. Best regards, Kim Boll Jensen Bolls Raadgivning Denmark <>

BlueTooth

Hi all Does anyone have a world wide list over Bluetooth approval requirements or can point me to a web page with good information. It is not the BT approval itself but the short range devices approval/requirements I seek. Best regards, Kim Boll Jensen Bolls Raadgivning Denmark <>

CE marking and governmental requirements

mally requires E marking according to directive 95/54/EEC. Best regards, Kim Boll Jensen Bolls Raadgivning Denmark <>

Re:Conducted Rf Failures...fixes?

eal life communication to seen if you have a problem at all. > > Best regards, > > Kim Boll Jensen > Bolls Raadgivning > Denmark > > j...@aol.com skriver: > > > In a message dated 10/8/2002, Alex McNeil writes: > > > > > > > >> As I am in p

Ampacity of telecom cables

think the ampacity can vary from different manufacturers but , does anyone have some kind of guide concerning ampacity of small signal cables ? Best regards, Kim Boll Jensen Bolls Raadgivning Denmark <>

EN 60601

Hi all I need a report form like those used in the CB scheme for EN 60601-1-1;2001 and for EN 60601-1 + A1, 2, 12, 13. I can't find anywhere to buy it. So could some one help me to get a copy or tell me where to buy them. Best regards, Kim Boll Jensen Bolls Raadgivning Denmark <>

Medical devices, current limit

/frequency diagram over max. current the the body can withstand without hazards ? (It is normally used for mains leakage current protection). Best regards, Kim Boll Jensen Bolls Raadgivning Denmark <>

PMM 8010 and 8030

Hi all I have just got a PMM 8010 and 8030 but without software, I can only download a WIN update from PMM not the whole software. Can some one help me with a copy of the original software ? Best regards, Kim Boll Jensen <>

digital devices

part 15 and ICES 003. It uses timing signals of more that 9.000/10.000 cycles pr. second. Best regards, Kim Boll Jensen Bolls Raadgivning Denmark <>

Radio approval i Japan

Hi All Can some one update me with information on the following: 433 MHz SRD and Bluetooth product approval requirements in: Japan Korea Taiwan Singapore I need information on both EMC, Radio and Safety. Best regards, Kim Boll Jensen Bolls Raadgivning <>

Creepage/clearance in EN 61010-1

? mm Best regards Kim Boll Jensen Bolls Raadgivning Denmark <>

SDR in the US

ense under part 90 ? Please help me ! Best regards, Kim Boll Jensen Bolls Raadgivning Denmark <>

R&TTE and video out

. Does this product fall under the R&TTE directive ? According to my interpretation the definitions in art. 2 c) and d) say that it has to be used for TX to be under this directive. What do you think ? Best regards, Kim Boll Jensen Bolls Raadgivning Denmark <>

Re: RTTE

Hi I'm sorry if I have confused things a little. But I visited this page: http://europa.eu.int/comm/enterprise/rtte/implem.htm And was so naive to think that when it says Adopted there was no national deviations, sorry. Best regards, Kim Boll Jensen Bolls "Andre, Pierre-Marie"

Re: In Line Fuseholder

Hi Bill Both Littelfuse and Wickmann Werke have these fuses Good Luck Kim Boll Jensen Bolls Raadgivning, Denmark Bill Wilson skriver: > HELP!!! I'm looking for a UL R/C, 250V in line fuseholder for 5X20mm > &/or .25"X1.25" fuses. There are a lot of 32Volters out t

Japan

Hi Does any one have the DENAN list of electrical equipment which is under the approval scheme in Japan. And also information to which standards equipment have to be tested Best regards, Kim Boll Jensen Bolls Raadgivning <>

telecom

Hi all I have lost my contact with the TREG group, can some one please tell me how to join again. Best regards, Kim Boll Jensen <>

ITE in Japan

Hi all What is the status for Japan concerning both EMC and Elec. safety is it still voluntary to comply ? What is the best place to seek information ? Best regards, Kim Boll Jensen <>

marine equipment

Best regards, Kim Boll Jensen <>

UL Plastic

. Can some one help me or point me in the right direction. Best regards, Kim Boll Jensen <>

use of spirit/alcohol

machine, since the fire point is 12 deg. C as far as we can find. Have anyone some experience with spirit and know how to handle it ? Best regards, Kim Boll Jensen <>

Re: Basic Test Standards: old vs. new - which one?

t use standards which have been outdated. They told me that there wasn't any official interpretation within EU, so before we gets too many questions like this I hope that we can get an official statement. Best regards, Kim Boll Jensen John Woodgate skriver: > I read in !emc-pstc that Patrick

Lasting of the CE marking

supports this statement. But what about R&TTE when new standards are harmonized where no standards was before ? Best regards, Kim Boll Jensen Bolls Raadgivning <>

Safety interlock

Hi all Does anyone know of a marking on a safety interlock switch whitch is a L in a circle. I'm looking for a switch which are tested for 100.000 cycles and I wander if the L marking was some thing like it (but I doubt). Best regards, Kim Boll Jensen Bolls Raadgivning <>

Re: ITE for industrial locations

also put it into the marketing brochures. Best regards, Kim Boll Jensen Bolls Raadgivning "Bailey, Jeff" skriver: > Hello group, > > I am in the process of defining a test plan for a product that fits nicely > into the definition of ITE as stated in > 3.1 of EN55022:1

Material classification

Hi all Does anyone know where I can get a list of the material classifications used in IEC 950 table C.1 concerning temp. limits for motors. It is also refereed to in UL3101-1/EN 61010-1. Best regards, Kim Boll Jensen <>

Re: EN61326 re-test? (was: M&E; Surge & Dips)

ired now) Best regards, Kim Boll Jensen Bolls Raadgivning wmf...@aol.com skriver: > Since EN 61326 is a fairly recent vintage, and only _just_ displaced my use > of EN50082, a couple of re-test questions: > > 1) Standard product already tested and 'declared' before EN61326

Laser products for Japan

Hi all Does anyone know of requirements in Japan for a Class 3b laser product: electrical safety EMC laser safety Best regards, Kim Boll Jensen Bolls Raadgivning <>

CISPR 11 and CISPR 22

Hi all Could somebody please send me the basic requirements for CISPR 11 emission limits I need to compare with CISPR 22 for a non radio product under EN60601-2. Best regards, Kim Boll Jensen Bolls Raadgivning Consultancy in world wide approvals <>

Products for evaluation

just add a label on the product with a text like this: For evaluation purpose only ? And what about EU, the manufacturer is located in EU ? Best regards, Kim Boll Jensen Bolls Raadgivning Consultant in type approvals --- This message is from the IEEE E

Re: Industrial ITE

mited only for industrial use. The last solution is normally not good because who knows if customers are in industrial or light industrial areas. Best regards, Kim Boll Jensen Bolls Raadgivning Consultancy in EMC & Safety approvals world wide rehel...@mmm.com skriver: > If you have ITE

TS0098/96 ?

Hi Can som one help me. One of our costumers wants a Surge test according to "TS0098/96 Part 1 issue Feb. 98". Where do I find this standard and what is the data of the surge test, is it like an ITU or FCC surge puls ? Best regards, Kim Boll Jensen Approval manager Eicon Networ

North American test house

t for that. Can some one give me names of possible test houses so we don't have to retest it all. Best regards, Kim Boll Jensen Approval manager Eicon Networks Denmark --- This message is from the IEEE EMC Society Product Safety Technical Committe

Re:Steel Ball For Impact Test

Hi, Some years ago I got one from a firm making ballbearing (SKF) they sell the ball's seperately. Best regards, Kim Boll Jensen i-data international Denmark jim_bac...@mail.monarch.com (Jim Bacher) on 21-03-2000 13:29:50 Please respond to jim_bac...@mail.monarch.com (Jim Bacher

MIL-STD-461

Dear all, Can someone help me ! I need the MIL-STD-461B and C version (I have D version) can I download these versions form the internet ? Best regards, Kim Boll Jensen - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord

RE: EN 61000-4-2

-- Forwarded by Kim Boll Jensen/INT on 2000-01-18 08:28 --- Helge Knudsen on 2000-01-17 19:11:53 Please respond to "hknud...@image.dk" To: Kim Boll Jensen/INT cc: Subject: RE: EN 61000-4-2 I will just forward this answer since t

EN 61000-4-2

umber is 50 at each points (but without any reference to any standard). Do anynoe know what the right number is and where I can find it Best regards, Mr. Kim Boll Jensen i-data international Denmark - This message is coming from the emc-pstc discussion list. To cancel your subscription,

Re: Working on products containing lasers

In Denmark the Factories Inspectorate have some local guids for employees. So I think you have to contact the Factories Inspectorate in your country. Best regards, Kim Boll Jensen i-data, Denmark roger.vi...@wwgsolutions.com on 99-12-22 15:12:34 Please respond to roger.vi

Paper manual - CD-ROM manual

e and will not accept a CD only. Can anyone help me in finding requirements for a paper version. (EN 60950 1.7.2 Safety Instructions; say "If it is necessary...") Best regards, Kim Boll Jensen i-data international Denmark - This message is coming from the emc-pstc discussion

Re: Question about EN55024

ll or know. Best regards, Kim Boll Jensen i-data international, Denmark "Sandy Mazzola" on 99-12-01 23:25:32 Please respond to "Sandy Mazzola" To: emc-p...@majordomo.ieee.org cc:(bcc: Kim Boll Jensen/INT) Subject: Question about EN55024 To All,

EN50082-2

mance criterion A or B ? IEC 1000-4-4 Burst; on DC power supply, what is the performance criterion A or B ? Best regards, Kim Boll Jensen - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: "u

Re: fwd: Re: EN 60 950 and Denmark

Yes Denmark is a full member of the EU and therefor CE marking is required. Denamrk have national deviation to EN 60 950 as many of the other EU countries have. You can find them in the CB bullitin. Best regards, Mr. Kim Boll Jensen i-data, Denmark b...@anritsu.com (Bailin Ma) on 99-09-28

Re: Temperature Measuring of Magnetic Components

Dear Mohajer and all If you are using type K thermocouplers you will have to turn off power to the component before measuring the temp. Since they are sensitive to magnetic fields. Best regards, Mr. Kim Boll Jensen i-data, Denmark Kamran Mohajer on 99-08-24 23:50:26 Please respond to

Antenna preamplifier

Dear All, Can anyone recommend a suplier of an antenna preamplifier for a TEM celle connected to a spectrum analyzer, for measuring from 30MHz to 1GHz. I need arround 10 - 20 dB gain Best regards, Mr. Kim Boll Jensen i-data, Denmark - This message is coming from the emc-pstc

FCC form 740

n the invoice/customs papers or do we have to use form 740 ? If I need to use form 740 does anyone help me with a EDB version (the one which I can downloade from FCC is scanned and can not be edited). Best regards, Mr. Kim Boll Jensen i-data, Denmark - This message is coming from th

Label requirement for conectors on teleequipment

x27;s just nice to have to help users. Best regards, Mr. Kim Boll Jensen i-data, Denmark - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: "unsubscribe emc-pstc" (without the quot

Load inductor

Hi groupe I'm tryimg to find an inductor for load test of a LAN circuit (10/100Base UTP). Do anyone know a manufacturer of 1% 220uH and 180uH inductors with the following specifications: Rparallel > 2Kohm, Rserial < 0.5 ohm and Cparallel = 12pF +-20% Best regards, Mr. Kim Bol Jensen i-data, D

Re: Australia Safety (UL/TUV)

institute). And furter UL is not a "must" for AC powered devices there are some alternatives for the US market. Best regards :-) Mr. Kim Boll Jensen i-data, Denmark - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord.

Country of origin

countries ? -which authoryties requires this informations other than EU directives (and FCC part 68) Best regards, Mr. Kim Boll Jensen i-data, Denmark - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org

FCC part 15 text

the equipment is OK: This equipment complies with the requirements in Part 15 of FCC Rules. See manual Where have UL got this text from and is it OK to use this short version ? Best regards, Mr. Kim Boll Jensen i-data, Denmark - This message is coming from the emc-pstc

EN 60950 productionline test

Boll Jensen i-data, Denmark - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to ed.pr...@cubic.com, j...@gwmail.monar

Telecom CE marking

Dear group, Can anyone help me with the layout of the EU telecom marking. Where can I down load the X mark layout . Best regards, Kim Boll Jensen i-data, Denmark - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org

ISDN and transient protection

Can somebody tell me what I need to do for protecting an ISDN-S and -U interface concerning transients on the line (both burst and surge). Best regards, Mr. Kim Boll Jensen I-data, Denmark - This message is coming from the emc-pstc discussion list. To cancel your subscription, send

ISDN and transient protection

Can somebody tell me what I need to do for protecting an ISDN-S and -U interface concerning transients on the line (both burst and surge). Best regards, Mr. Kim Boll Jensen I-data, Denmark - This message is coming from the emc-pstc discussion list. To cancel your subscription, send