RE: Dwell time for Immunity under EN55024?

2002-10-04 Thread Leslie Bai
rt Gremmence-test-Original Message- From: Leslie Bai [mailto:leslie_...@yahoo.com] Sent: donderdag 3 oktober 2002 21:37 To: Gert Gremmen; paul_sc...@mitel.com; emc-p...@majordomo.ieee.org Subject: RE: Dwell time for Immunity under EN55024? Gert Gremmen wrote: "... prescan with Increa

Re: Dwell time for Immunity under EN55024?

2002-10-04 Thread John Woodgate
I read in !emc-pstc that Gert Gremmen wrote (in ) about 'Dwell time for Immunity under EN55024?' on Fri, 4 Oct 2002: >Any deviation of the standard is doomed to art 10.2 , but changing an >undefined dwell >time to better meet the intention of the standard

RE: Dwell time for Immunity under EN55024?

2002-10-04 Thread Gert Gremmen
om: Leslie Bai [mailto:leslie_...@yahoo.com] Sent: donderdag 3 oktober 2002 21:37 To: Gert Gremmen; paul_sc...@mitel.com; emc-p...@majordomo.ieee.org Subject: RE: Dwell time for Immunity under EN55024? Gert Gremmen wrote: "... prescan with Increase frequency step size ! (w

Re: Dwell time for Immunity under EN55024?

2002-10-03 Thread Ken Javor
reasonable time period. This is all part of engineering, it is more than just lock-step response to standardized test procedures. -- From: Leslie Bai To: Gert Gremmen , paul_sc...@mitel.com, emc-p...@majordomo.ieee.org Subject: RE: Dwell time for Immunity under EN55024? List-Post: emc-pstc

RE: Dwell time for Immunity under EN55024?

2002-10-03 Thread Leslie Bai
Gert Gremmen wrote: "... prescan with Increase frequency step size ! (watch out for resonances) Modify equipment to decrease fault response time (low pass filters ; software ) Build Specifc test features Write specific test software ." "I am wondering whoelse out there doing these - Is

Re: Dwell time for Immunity under EN55024?

2002-10-03 Thread John Woodgate
I read in !emc-pstc that Gert Gremmen wrote (in ) about 'Dwell time for Immunity under EN55024?' on Thu, 3 Oct 2002: >The test will give you only PRESUMPTION of compliance anyway. It is extremely misleading to cast continual doubt on the standards route to compliance simply throug

RE: Dwell time for Immunity under EN55024?

2002-10-03 Thread Gert Gremmen
om Sent: donderdag 3 oktober 2002 00:54 To: emc-p...@majordomo.ieee.org Subject: Dwell time for Immunity under EN55024? Greetings, Problem: What is the correct dwell time to be used for radiated and conducted immunity for 61000-4-3/61000-4-6 under EN55024? My thoughts; Section 8 of IEC 61000-4-3 (I h

Dwell time for Immunity under EN55024?

2002-10-02 Thread Paul_Scott
Greetings, Problem: What is the correct dwell time to be used for radiated and conducted immunity for 61000-4-3/61000-4-6 under EN55024? My thoughts; Section 8 of IEC 61000-4-3 (I have 1995): "The rate of sweep shall not exceed 1.5 x 10 -3 decades/s." I understand we shall not exceed a 1 % step