I would suggest trying to add noapic to your start. I believe you would
access the line by hitting F6 before you start trying to run from cd. If
that is the case you would just add it to the end of the line that comes up.
Kyle
Craig wrote:
Machine Dell optiplex110, 1GHz, 384 Meg memory, recent
I have tried boot options pci=noacpiBOOT_DEBUG=2|3 DEBCONF_DEBUG=5
and just adding noacpiall with apparently no change in response
except possibly a screen that flashes by to fast to read.
I put these before the -- at the end of the boot line.
More suggestions??
Kyle wrote:
I would
On Wed, Jun 20, 2007 at 09:31:24AM -0700, Craig wrote:
I have tried boot options pci=noacpiBOOT_DEBUG=2|3 DEBCONF_DEBUG=5
and just adding noacpiall with apparently no change in response
except possibly a screen that flashes by to fast to read.
I put these before the -- at the end
Further investigation produced this document:
http://www.wallacecompany.com/cnc_lathe/Servo_Schem.png
, which seems to indicate that, these are indeed analog input servo
amps.
On Tue, 2007-06-19 at 21:30 -0500, Jon Elson wrote:
Kirk Wallace wrote:
Thanks for the replies Jon and Ray. Like
RogerN wrote:
My m5i20 motion addition:
newsig spindle-index-enable bit
linkps motion.spindle-index-enable = spindle-index-enable
linksp spindle-index-enable = m5i20.0.enc-03-index
The last line should be:
linksp spindle-index-enable = m5i20.0.enc-03-latch-index
Its confusing that the
