At 08:33 PM 3/30/2009, you wrote:
>(Some folks will be showing off and distributing EMC2 at a booth at
>the 2009 NAMES Expo, April 18-19, in Toledo, OH. This is just an
>update. There's more info on the wiki page below.)
>
>The booth is confirmed (B-15), 200 CDs are being copied and printed
>(tha
Hi, Dale -
Just a brief update on the CDs. We are in the groove. All 200 have been
burned, and I am printing the second hud
On Mon, Mar 30, 2009 at 8:33 PM, Dale Grover wrote:
> (Some folks will be showing off and distributing EMC2 at a booth at
> the 2009 NAMES Expo, April 18-19, in Toledo, OH
Hi Guys:
Have any of you implemented the one button touch-off that's listed in the
ladder examples in the Wiki? I can't seem to make it work. Here's my
progression to this point:
I've updated to 2.3Beta and ran the stepper wizard at which time I added the
ladder app for E-stop using both the
On Tue, 2009-03-31 at 20:04 -0400, Dean wrote:
> Hi Guys:
>
> Have any of you implemented the one button touch-off that's listed in the
> ladder examples in the Wiki? I can't seem to make it work. Here's my
> progression to this point:
>
>
>
> I've updated to 2.3Beta and ran the stepper wiza
> I've updated to 2.3Beta and ran the stepper wizard at which time I added the
> ladder app for E-stop using both the hardware and EMC soft e-stops. When I
> ran EMC (AXIS) everything worked great. Getting a little cocky at this
> stage, I decided to learn something about classic ladder and tri
Has anyone used Vitalsystems Motenc-Lite (7544)?
Is there any significant difference (in rapid moves) by running the machine
with 7i43-P or 5i20?
--- On Sun, 3/29/09, Sebastian Kuzminsky wrote:
> From: Sebastian Kuzminsky
> Subject: Re: [Emc-users] MESA 7I43 and 7I33 OR 5I20 and 7I33 OR
> M
On Mar 31, 2009, at 10:15 PM, Shabbir Hussain wrote:
>
> Has anyone used Vitalsystems Motenc-Lite (7544)?
> Is there any significant difference (in rapid moves) by running the
> machine with 7i43-P or 5i20?
>
>
>
The Mazak emc conversion at fest a few years ago used the Motenc-
Lite board.
Kirk:
That statement was already in my .hal file. But, I did comment out the
'motion.motion-inpos' line in the postgui.hal file and that did allow EMC to
run. Thanks for the suggestion and I'll keep plugging away.
Dean
-Original Message-
From: Kirk Wallace [mailto:kwall...@wallacecompan
