Re: [Emc-users] MAXNC Open Loop Mill

2009/10/7 Kirk Wallace kwall...@wallacecompany.com I use EMC2 quadrature output on my Shizuoka mill: http://www.wallacecompany.com/machine_shop/Shizuoka/ which is used to drive the steppers in half-step mode. Basically, there is just an amplifier between EMC2 and the stepper. If you ever

Re: [Emc-users] MAXNC Open Loop Mill

2009/10/7 Kirk Wallace kwall...@wallacecompany.com: I use EMC2 quadrature output on my Shizuoka mill: http://www.wallacecompany.com/machine_shop/Shizuoka/ which is used to drive the steppers in half-step mode. I assume this is what they are doing in the MAXNC mills, they have probably

[Emc-users] Does EMC save coordinations on program shutdown?

Hello Guys, I have question about coordination. When I start EMC it always has HOME coordinations, does not matter if I finished at home or at another place. Does exists any way to save coordinations and start emc with saved coordinations? Best Regards Evgney

Re: [Emc-users] MAXNC Open Loop Mill

On Wed, 2009-10-07 at 09:43 +0200, Sven Wesley wrote: 2009/10/7 Kirk Wallace kwall...@wallacecompany.com I use EMC2 quadrature output on my Shizuoka mill: http://www.wallacecompany.com/machine_shop/Shizuoka/ which is used to drive the steppers in half-step mode. Basically, there is just

Re: [Emc-users] MAXNC Open Loop Mill

2009/10/7 Kirk Wallace kwall...@wallacecompany.com On Wed, 2009-10-07 at 09:43 +0200, Sven Wesley wrote: 2009/10/7 Kirk Wallace kwall...@wallacecompany.com If you ever find an odd function in EMC2, you can be sure Kirk uses it. :) Kirk, what are the optointerrupters for? --S If you

Re: [Emc-users] Does EMC save coordinations on program shutdown?

??? ? wrote: Hello Guys, I have question about coordination. When I start EMC it always has HOME coordinations, does not matter if I finished at home or at another place. Does exists any way to save coordinations and start emc with saved coordinations? EMC saves the

Re: [Emc-users] MAXNC Open Loop Mill

On Wed, 2009-10-07 at 18:52 +0200, Sven Wesley wrote: ... snip It's an odd combination of this image: http://www.wallacecompany.com/machine_shop/Shizuoka/mpg_proto-1a.jpg http://www.wallacecompany.com/machine_shop/Shizuoka/mpg_proto-1a.jpgand the text The PDF for the opto-interupters is here

Re: [Emc-users] UK EMC Users Meetup

Hi all any body interested in the UK meet up a number of us will be attending on Friday 16th for all thoes interested a meet place time is yet to be agreed robert -- Come build with us! The BlackBerry(R) Developer

Re: [Emc-users] UK EMC Users Meetup

On Wed, 07 Oct 2009 19:32:21 +0100, you wrote: any body interested in the UK meet up a number of us will be attending on Friday 16th for all thoes interested Saturday maybe but certainly not on Friday, I've work to do and a 250 mile round trip on the M6 in Friday traffic is not high on my list

Re: [Emc-users] UK EMC Users Meetup

I would really like to come but its just too far and on the wrong day.. but I would like to know what happens. Aaron in Cornwall - Original Message - From: Steve Blackmore To: Enhanced Machine Controller \(EMC\) Subject: Re: [Emc-users] UK EMC Users Meetup Date: Wed, 07 Oct

[Emc-users] Amp Enable Wiring logic.

Seeing as how we have at least a few people here who really understand pull-ups etc (and I am not one of them) I did have everything working fine, but then I blew some drivers meddling with things, and when I replaced them I took the opportunity to get a bigger driver for the X/Z axis (what it

Re: [Emc-users] Amp Enable Wiring logic.

On Thu, 2009-10-08 at 00:27 +0100, Andy Pugh wrote: Seeing as how we have at least a few people here who really understand pull-ups etc (and I am not one of them) I did have everything working fine, but then I blew some drivers meddling with things, and when I replaced them I took the