Hello...
I know that laptop's are not great for EMC, but I have few of them lying
around and wish to use it.
HP NX9005 work's now for longer time without some troubles. It has some
strange thing. The layency in 1'st few minutes (up to 5) is high(in
range 1ms). I don't know why but after that
2010. gada 3. jūnijs 16:28 Andy Pugh a...@andypugh.fsnet.co.uk rakstīja:
2010/6/3 Viesturs Lācis viesturs.la...@gmail.com:
In kinematics.hal I have following assignement between joints and axis:
setp gantrykins.joint-0 0
setp gantrykins.joint-1 0
setp gantrykins.joint-2 1
setp
2010/6/4 Viesturs Lācis viesturs.la...@gmail.com:
The rest of your HAL and INI would work better with
setp gantrykins.joint-0 0
setp gantrykins.joint-1 1
setp gantrykins.joint-2 2
setp gantrykins.joint-3 0
Ok, thank You, I will try this out.
Could You, please, be more specific on what
On Thu, Jun 03, 2010 at 06:56:43PM -0400, Paul Keeton wrote:
You are correct Jeff, That's the correct error format I was getting. I have
been bumping this memory thing for a while but have been getting around it
creatively ;)
If I open up more memory will it take memory away from other
Jeff Epler wrote:
It's taking memory away from whatever your total system memory is.
Since even tiny machines have 1GB or more of RAM these days, you are
unlikely to notice a difference if you change it from the current value
of about 256KB to 1MB, but you'll have room for 4x as many pins,
2010/6/4 Andy Pugh a...@andypugh.fsnet.co.uk:
2010/6/4 Viesturs Lācis viesturs.la...@gmail.com:
The rest of your HAL and INI would work better with
setp gantrykins.joint-0 0
setp gantrykins.joint-1 1
setp gantrykins.joint-2 2
setp gantrykins.joint-3 0
Ok, thank You, I will try this out.
2010/6/4 Viesturs Lācis viesturs.la...@gmail.com:
It is worth bearing in mind that I have never configured a gantry
machine properly. I set my lathe up with the axes paired once to
experiment with homing sequences, but that is the total of my
experience.
I have a question, regarding this
2010. gada 5. jūnijs 01:19 Andy Pugh a...@andypugh.fsnet.co.uk rakstīja:
2010/6/4 Viesturs Lācis viesturs.la...@gmail.com:
setp gantrykins.joint-0 0
setp gantrykins.joint-1 1
setp gantrykins.joint-2 2
setp gantrykins.joint-3 3
setp gantrykins.joint-4 4
setp gantrykins.joint-5 0
That
