On Sat, 26 Jun 2010 12:45:08 -0600, you wrote:
>I talk to mold making shop and they said that they tried all those CAM and
>chose to use PowerMill. Remaining CAM from the list occasional crash
>and/or break tool.
Occasional crashes on a new part are mostly down to bad programming
choices or lack
2010/6/27 Steve Blackmore
> On Sat, 26 Jun 2010 12:45:08 -0600, you wrote:
>
>
> >I talk to mold making shop and they said that they tried all those CAM and
> >chose to use PowerMill. Remaining CAM from the list occasional crash
> >and/or break tool.
>
> Occasional crashes on a new part are mostl
Hi Aram
> I want to ask about CAD/CAM or just CAM software.
We had a CAM Thread on 2010.03.20 when Karl Schmidt asked about CAM
solutions. Here you can find at least a part of the thread (probably the
complete one, but I was unable to locate the first posting):
http://sourceforge.net/mailarchi
On Sun, 27 Jun 2010 11:37:51 +0200, you wrote:
>Not entirely, I've been working with CAM-systems where the engagement
>strategies were too bad and violently snapped mills when entering the
>material.
Also poor programming - choice of tool/feed/speed.
Some cheap carbide tooling likes to snap no
> Hi
> I want to ask about CAD/CAM or just CAM software. There are many CAM
> out
> there MasterCAM, UG, CATIA, PowerMill.
> I talk to mold making shop and they said that they tried all those
> CAM and
> chose to use PowerMill. Remaining CAM from the list occasional crash
> and/or break tool.
>
> These questions come up every now and then, for more answers search the
> archive or check the wiki at http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Cam
> We might update the wiki with all the CAM's known to work with EMC2?
Would be interesting if post processors adjusted for emc2 could be
added
On Sun, Jun 27, 2010 at 6:06 AM, Steve Blackmore wrote:
> On Sun, 27 Jun 2010 11:37:51 +0200, you wrote:
>
>
>>Not entirely, I've been working with CAM-systems where the engagement
>>strategies were too bad and violently snapped mills when entering the
>>material.
>
> Also poor programming - choic
On 6/27/2010 10:57 AM, Ries van Twisk wrote:
> Let the companies know at
> hand because sometime they just send a sales men that
> never worked with the tool he sells.
>
Having worked in Sales before, I can say with confidence that this is
very good advice.
In fact, you might want to ask for
2010/6/27 Steve Blackmore
> On Sun, 27 Jun 2010 11:37:51 +0200, you wrote:
>
>
> >Not entirely, I've been working with CAM-systems where the engagement
> >strategies were too bad and violently snapped mills when entering the
> >material.
>
> Also poor programming - choice of tool/feed/speed.
We
> On Sat, 26 Jun 2010 12:45:08 -0600, you wrote:
>
>
>>I talk to mold making shop and they said that they tried all those CAM
>> and
>>chose to use PowerMill. Remaining CAM from the list occasional crash
>>and/or break tool.
>
> Occasional crashes on a new part are mostly down to bad programming
>
Some asked for video at the CNC Workshop, so here it is...
http://www.youtube.com/watch?v=S0re79zEX5A
-Tom
--
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com
With the help of this web
site.http://www.kirupa.com/developer/actionscript/trig_multiple_axis.htm
I was able to come up with the following :
(cutting two arcs at same time)
#3=40 (step size for z axis arc radians?)
#4=#3 (x running total for z axis arc)
#5=#3 (y running total for z axis arc)
#6=
That looks like it should possibly go on the wiki as a bit of useful code
Dave Caroline
--
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.s
On Sunday 27 June 2010, Tom Easterday wrote:
>Some asked for video at the CNC Workshop, so here it is...
>
>http://www.youtube.com/watch?v=S0re79zEX5A
>
>-Tom
I gotta say it Tom, that is kewl!
Thanks.
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, a
On Sunday 27 June 2010, Jim Wilkin wrote:
>With the help of this web
>site.http://www.kirupa.com/developer/actionscript/trig_multiple_axis.htm
>I was able to come up with the following :
>(cutting two arcs at same time)
>
>#3=40 (step size for z axis arc radians?)
>#4=#3 (x running total for z axis
15 matches
Mail list logo