Hi,
I've got one of these boards and have wondered about using it as a controller.
Porting EMC2 could be quite and effort, it's quite a
low spec. board. The Mini6410 might be a more straightforward prospect. You'd
need the display and touch screen to work in.
And I don't know what the state of re
On Thu, 2011-11-17 at 20:56 -0600, Jon Elson wrote:
> Kent A. Reed wrote:
> > Well, I certainly never heard of this until now, and I spent a fair
> > amount of time reading the docs when you were first talking about the
> > Beagle Board. Now I don't feel so bad that some time ago I got tired of
On 20 November 2011 22:25, Kirk Wallace wrote:
> I wonder if another processor would be better? The System-on-chip
> processors seem to have the same problems as common PC processors in
> that they incorporate features to cater to media and Internet
> applications. Maybe a server or DSP processor
Gentle persons:
It's been a few days since I got a chance to look at hackaday.com
I found this entry from a few days ago
http://hackaday.com/2011/11/16/eagleup-pulls-your-pcbs-into-sketchup/
The picture shows why you might want to try this if you use Eagle CAD to
lay out PCBs.
Regards,
Kent
Kirk Wallace wrote:
> I wonder if another processor would be better? The System-on-chip
> processors seem to have the same problems as common PC processors in
> that they incorporate features to cater to media and Internet
> applications. Maybe a server or DSP processor would be better?
>
>
Well
On Sun, 2011-11-20 at 17:04 -0600, Jon Elson wrote:
> Kirk Wallace wrote:
> > I wonder if another processor would be better? The System-on-chip
> > processors seem to have the same problems as common PC processors in
> > that they incorporate features to cater to media and Internet
> > applications
On Mon, 14 Nov 2011 16:06:54 +0330
Farzin Kamangar wrote:
> Hello, dear EMC users;
> Considering the tool changing process, is there a way to send
> some movement commands from PLC to CNC?
> I have entered the TOOL_CHANGE_POSITION and TOOL_CHANGE_QUILL_UP in
> the INI file and in the EMCIO
Kirk Wallace wrote:
> I seem to recall the ARM chips had a cache between the core and the I/O
> buss. I browsed some links to the Blackfin chips and wonder if this link
> indicates a more direct link between the core and the PPI and other I/O?
> http://www.analog.com/en/processors-dsp/blackfin/adsp
dave wrote:
>
>
> Some years ago a group of emcer's converted a Mazak V5 to emc. Lots of
> information is available in the wiki, logs, logic, etc but I cannot
> find an entry on the classicladder code (for tool change), etc. Maybe
> someone else can help here.
>
Every EMC2 install should have t
