Andy pugh wrote:
>I might still be tempted to "tune" them. (ie, forget the science, just
>make small changes and see what happens).
>How far out are the distances?
The distances are far5 or 6 cm more on z and 4 or 5 cm less on x and y!!
And then the movement aren't linearfor example the
Matt;
Just a FYI; I did a part with cutouts, drawn in QCad. Then through dxf2gcode,
modified the GCode to better suit my usage.
Ok, as I'm a novice at this, too, thought you'd maybe be interested:
1) used Inkscape to get the "winding" of the line segments correct. I'm not
sure if this is an i
Mathew,
Welcome!
> I'll probably post lots of questions in the future - my first one is - how
> do I search the archives? I couldn't find a way on the sourceforge page.
http://sourceforge.net/search/?group_id=6744&type_of_search=mlists will search
the email lists, but it's not the best search
On 6 December 2011 14:04, matthew venn wrote:
> I'll probably post lots of questions in the future - my first one is - how
> do I search the archives?
The search box on the middle left of the main linuxcnc.org page
searches the the forum, wiki and web site.
The green box at the bottom of the mai
2011/12/6 matthew venn :
>
> I'll probably post lots of questions in the future - my first one is - how
> do I search the archives? I couldn't find a way on the sourceforge page.
Google can be Your friend. Pretty often it finds results also in mail archives.
Here is one emc user mailing list archi
Jeff Went and updated his blog with the pertinent info. Thank you Jeff!
Yay - now it is all in one place again.
http://emergent.unpythonic.net/01198594294
sam
On 12/6/2011 8:42 AM, sam sokolik wrote:
> Ok - the last error was this...
>
> http://pastebin.com/CvEBeCHg
>
> which happened atleast 2
Hello!
just wanted to say hi, I'm a new member to the list. I'm based in Bristol
UK, and do a lot of my work out of the bristol hackspace.
I've just bought a small CNC router (made by routoutuk), and have tested it
successfully with EMC. I used qcad, dxf2gcode and then EMC.
I'll probably post lo
Ok - the last error was this...
http://pastebin.com/CvEBeCHg
which happened atleast 20% of the time and after talking to jepler he
suggested adding a if port < 6: to the arduino.py code. You can see it
here
http://pastebin.com/PMLftHUi
line 77 is the extra 'if' statement and then every thing
On 6 December 2011 12:48, Francesca Sca wrote:
> I checked the d-h parameters many many times and they should be correct.
I might still be tempted to "tune" them. (ie, forget the science, just
make small changes and see what happens).
How far out are the distances?
> Also if I don't understand
andy pugh wrote:
>It may be that the joint lengths in the DH parameters are slightly
>wrong. It is less likely to be the stepgen scales, but that would have
>a similar effect.
I checked the d-h parameters many many times and they should be correct. Also
if I don't understand why in world mode t
10 matches
Mail list logo
