I looks like a timing issue. Gladevcp needs pins from hidcomp, but hidcomp
hasn't initialised completely yet. Have you tried the -W (or -Wn) option
with hidcomp?
See the man page for loadusr.
> -Original Message-
> From: Spiderdab [mailto:77...@tiscali.it]
> Sent: Saturday, 7 January
ehm... it must be something stupid with Virtualbox memory i think..
I just started again Vbox without 3Dsupport, neither VT-x or any kind of
acceleration.
Then first time run the full machine and it runs ok!!
closed the window, then re-run the same machine and it gives me error...
i'm starting to
> > ...tgvcp.hal:141: Pin 'hidcomp.0.Slider.fvalue' does not exist
> The pin is not created but i don't know if it's .hal fault or hidcomp's.
...
> if i try to run my setup with hidcomp, but without gladevcp i have two cases:
> -it's ok if it's the first thing i do after turning on the machine
Il giorno sab, 07/01/2012 alle 09.25 +1100, Frank Tkalcevic ha scritto:
> > in my setup i use a joystick, and i load that using hidconfig/hidcomp.
> > if i run hidconfig it can see the joystick, so i think permissions are
> right. but
> > when i run my machine i have this error:
> > ..2012/01/06
>
> in my setup i use a joystick, and i load that using hidconfig/hidcomp.
> if i run hidconfig it can see the joystick, so i think permissions are
right. but
> when i run my machine i have this error:
> ..2012/01/06
> 16:56:49.243,2011,1,hiddevice.cpp:172,Error,hidcomp,HIDDevice,Error
> reading HID
I've solved my kins-compile problem. I just had to uninstall emc2 and
install emc2-sim, also if i've compiled my emc2-dev as simulator.
Now I have another problem. I'm far from my machine pc, so i've copied
my setup and try to run that as sim, to work on my Gladevcp panel. I
i've installed emc2 wi
On Friday, January 06, 2012 08:41:29 AM Peter Blodow did opine:
> Gene, no worry, things aren't so bad. You just specified a little too
> many http's and www's in your URL. It works now, I saw your machinery.
> Looks much more tidy than my shop and what's in it. But I haven't done
> much work ther
On 6 January 2012 10:27, Viesturs Lācis wrote:
> How is 5i23 mounted? I do not see that it is fixed anywhere.
In that picture it is just sat there in the PCI connectors. Since then
I have added a bracket from the mounting holes onto the aluminium
mounting plate.
--
atp
The idea that there is n
2012/1/5 andy pugh :
> On 4 January 2012 23:48, Eric Keller wrote:
>> do you have any pictures of it set up?
>
> https://picasaweb.google.com/lh/photo/CQTCSBXP42w4qc8viPm_ztMTjNZETYmyPJy0liipFm0?feat=directlink
>
> (In that picture is the D510MO motherboard, PicoPSU, DOM SATA drive,
> 12V CPU, Ard
Gene, no worry, things aren't so bad. You just specified a little too
many http's and www's in your URL. It works now, I saw your machinery.
Looks much more tidy than my shop and what's in it. But I haven't done
much work there last year, all around. Had to get used to being
retired... I think
dave schrieb:
>
> I presume some of you have read:
>
> http://en.wikipedia.org/wiki/The_Mother_Tongue
>
> Dave
>
>
No, I haven't read the book, but maybe will. One of my other hobbies
beside electronics etc. is linguistics...
Peter
-
11 matches
Mail list logo
