2012/1/5 andy pugh <bodge...@gmail.com>: > On 4 January 2012 23:48, Eric Keller <eekel...@psu.edu> wrote: >> do you have any pictures of it set up? > > https://picasaweb.google.com/lh/photo/CQTCSBXP42w4qc8viPm_ztMTjNZETYmyPJy0liipFm0?feat=directlink > > (In that picture is the D510MO motherboard, PicoPSU, DOM SATA drive, > 12V CPU, Arduino, resolver board, Mesa 5i23, Mesa 7i64 and Mesa 7i44, > mainly mounted on the back of the touchscreen.
Wow, beautiful How is 5i23 mounted? I do not see that it is fixed anywhere. > > I think that there is a HAL module that links in to lmsensors to > allow you to view such things inside EMC2. > > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?ContributedComponents#Motherboard_Sensors Is there a place with more information, how to install components, written in python? This line is not sufficient for me: chmod 755 component.py && sudo cp component.py /usr/local/bin/component 2012/1/5 Frank Tkalcevic <fr...@franksworkshop.com.au>: > I've used this on my lathe and just updated my mill from mach to > emc2+5i20... > > http://www.mini-box.com/Intel-D945GSEJT-Mini-ITX-Motherboard > http://www.mini-box.com/M350-universal-mini-itx-enclosure > http://www.mini-box.com/I-O-shield-and-riser-card-for-D945GSEJT > > along with the DIN rail mounts to put the box in my enclosure. It is a bit > of a squeeze, but worked well. These look nice, thanks for sharing, because I was thinking about building a mini-itx PC and these might become useful. Viesturs ------------------------------------------------------------------------------ Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex infrastructure or vast IT resources to deliver seamless, secure access to virtual desktops. With this all-in-one solution, easily deploy virtual desktops for less than the cost of PCs and save 60% on VDI infrastructure costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users