Hello, folks!
First of all, I apologize for the total non-LinuxCNC topic.
This is the only place I know, where some people might have related
experience...
I have my own domain and I have my mailboxes with my domain in Google Apps.
Today in spam folder I see "mail delivery failure", "undelivered
Chris M,
1- I tested Latency , and put the number in wizard
2- yes I tested the Axis but they didn't move in this test !!
3- I woud like the parallel port signal but I don't know how I could test it
I used the original Ubuntu EMC 2 that Sherline send with their driver box ,
normally it set fo
> I am looking to retrofit a K&T Moduline, located in Baton Rouge, Louisiana.
> Is there anyone interested in this job? I plan on getting
> all the amplifiers and resolver to encoder replacements before the
> services would be necessary. Please contact me at one of these two numbers if
> you are
Chris Morley wrote:
> Only the setp lines with substitution variables need be in the first HAL
> file. eg.
>
> setp ppmc.0.encoder.00.scale [AXIS_0]INPUT_SCALE
>
> Those pins should be present after loading the ppmc component no?
>
Yes, and the file xxx_load.hal loads the hal components. Then,
From: chrisinnana...@hotmail.com
To: s...@highlab.com
Subject: RE: [Emc-users] Sherline Mill 5410 and EMC2
Date: Sun, 24 Jun 2012 20:04:03 +
> Date: Sun, 24 Jun 2012 11:54:44 -0600
> From: s...@highlab.com
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Sherline Mill
2012/6/24 John Thornton :
> My guess is he doesn't know where they are...
In that case, for the information of all the new users or anyone else,
who has not discovered it yet or read it in manual.
The way to access LinuxCNC sample configs:
Open "Applications" menu in the upper left corner of Ubun
My guess is he doesn't know where they are...
John
On 6/24/2012 12:54 PM, Sebastian Kuzminsky wrote:
> On 06/24/2012 11:00 AM, Robot Abzar Team wrote:
>> I purchased a 5410 cnc-ready with 8760 driver box . and try to make the
>> configuration by myself ,
> Is there a reason you don't want to you
On 06/24/2012 11:00 AM, Robot Abzar Team wrote:
> I purchased a 5410 cnc-ready with 8760 driver box . and try to make the
> configuration by myself ,
Is there a reason you don't want to you use the known-good Sherline
config that ships with LinuxCNC? It might at the very least be a good
startin
Hi all ,
I purchased a 5410 cnc-ready with 8760 driver box . and try to make the
configuration by myself ,
But after so many setting , the machine don't work , in fact the stepper
motor don't have any reaction to program !
Here I explain what I did exactly :
1- I buy a PC exactl
On 24 June 2012 15:21, Ralph Stirling wrote:
> Andy, I am not using a 7I39, but can work with that pinout fine.
There are two styles of 3-pwmgen. The firmwares with TP in their name
have 6 pins per PWM (complementary high-side and low-side drive, with
a gap to prevent shoot-through) whereas the
Thanks, Andrew. Those should be very helpful. I didn't realize
the SVST4_4 firmware supports 3pwmgens.
Andy, I am not using a 7I39, but can work with that pinout fine.
For my initial testing I'm just lowpass filtering the PWM to get
analog sine waves and putting those into some lab power op
11 matches
Mail list logo
