On 1 October 2012 05:35, Kent A. Reed kentallanr...@gmail.com wrote:
It's been 40 years since I did any serious sputtering
Not quite so long for me, nearer 20, but I suspect that the equipment
was the same age.
Typically, we had a christmas tree of aneroid gauge,
thermocouple gauge, Pirani
Good timing of this discussion, I just had a request for an Edwards
High Vacuum diffusion pump manual (model A102)
and while looking at the documentation I have and its source (Joseph
Lucas Ltd, likely the semiconductor manufacturing unit) ) I notice I
have the manual for a high vacuum coating
It tells you how in the link Peter gave you below.
Mark
On Mon, Oct 1, 2012 at 5:13 AM, Ricardo Pereira rick0...@hotmail.com wrote:
thanks for your help, just have one question how do i change the lapic
Date: Sun, 30 Sep 2012 21:06:37 -0700
From: p...@mesanet.com
To:
On 10/01/2012 05:45 AM,Kirk Wallace wrote:
I'm playing with the thought of putting a vacuum deposition system
together to coat telescope mirrors with aluminum. It looks like I could
get everything I need from eBay at relatively low cost. Of course,
elements of LinuxCNC could be used to monitor
Kirk Wallace wrote:
I'm playing with the thought of putting a vacuum deposition system
together to coat telescope mirrors with aluminum. It looks like I could
get everything I need from eBay at relatively low cost. Of course,
elements of LinuxCNC could be used to monitor and control the
Chris all,
Just to close the loop... It works perfect. It took me a while to
figure out what you meant by typing a custom name in the combo box -
but I now see its just that. Type a name in the smart serial's pin
'box' that normally says 'unused input' and PNCConf will tie the mesa
input to
Date: Mon, 1 Oct 2012 21:32:25 -0400
From: smdubov...@gmail.com
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] PNCConf - MPG question (feed/spindle override)
Chris all,
Just to close the loop... It works perfect. It took me a while to
figure out what you meant by
