Hi All,
A new version 1.4.3 of gcmc has been released.
The major change is a bugfix in the execution of if/elif/else
statements, where the final else would fail to executo when all if/elif
clauses were false.
Changes include:
- Feature: Add option --gcode-nom2 to replace ending M2 with % in gcode
Are you writing the ISO file to the CD or are you putting the image on
the CD?
Put the CD into a windows PC and look at the disk with explorer.
Do you see the iso file there?If so, you did not write the iso image
to the CD, you wrote the ISO file to the CD.
Its an easy mistake to make.
Da
Help please,
I have downloaded 10,04 several times, always the version with 3 in the title
and burn to cd.
when I try to boot or load from the cd I get the message that says there is no
operating system found on the cd. If I list the cd contents then I see a 0
byte entry for Ubuntu.
I do n
John
I was running from RIP,Anyway as it is running on the beaglebone i think
i can manage to work on it but thanks for trying to help.
On 05/02/14 11:21, John Thornton wrote:
> I should have asked are you running it in a RIP or did you install it?
>
> JT
>
> On 2/5/2014 5:15 AM, Mark Tucker wro
I have submitted two lectures to the Forum (under Advanced Configuration)
about the implementation of robot kinematics in Linuxcnc.
These were presented in a series of lectures/workshops to our local CNC club
(SA-CNC-CLUB). The first one is of academic nature and deals with planer
3-DOF robots to k
I should have asked are you running it in a RIP or did you install it?
JT
On 2/5/2014 5:15 AM, Mark Tucker wrote:
> John
>
> Yes i was running master on 10.04
> And there were no errors showing in the terminal.
> But strangely i just tried it on BBB machinekit and it is working.
>
> On 05/02/14 1
John
Yes i was running master on 10.04
And there were no errors showing in the terminal.
But strangely i just tried it on BBB machinekit and it is working.
On 05/02/14 11:09, John Thornton wrote:
> Run it from a terminal and see if any errors are reported.
>
> Are you running master on Ubuntu 10.
Run it from a terminal and see if any errors are reported.
Are you running master on Ubuntu 10.04?
JT
On 2/5/2014 3:49 AM, Mark Tucker wrote:
> I have been fiddling around with JT's Tutorials,in particular Gui3 shown
> here http://gnipsel.com/linuxcnc/gui/index.html.
> I can get this to run on 2
I have been fiddling around with JT's Tutorials,in particular Gui3 shown
here http://gnipsel.com/linuxcnc/gui/index.html.
I can get this to run on 2.5.3 no problem,but when i try to run from 2.6
pre it loads up and you can take the machine out of estop but the run
button stays greyed out?
I have
See if the address that is used when the parport driver is loaded in the
HAL file is what you expected it to be. You can also post you HAL file
here so we can have look at that for you.
On 2014-02-05 10:10, Matthieu Patou wrote:
> Hello All,
>
> I have an atom desktop with a partport at 0x378 a
Also, PNCCONF might not have loaded the parport driver that you should use.
On 2014-02-05 10:10, Matthieu Patou wrote:
> Hello All,
>
> I have an atom desktop with a partport at 0x378 and a 7i43 + 7i42 hooked
> to it and it's working well with LinuxCNC 2.5.3.
> On a thinkpad laptop I have a PCMCIA
Hello All,
I have an atom desktop with a partport at 0x378 and a 7i43 + 7i42 hooked
to it and it's working well with LinuxCNC 2.5.3.
On a thinkpad laptop I have a PCMCIA parport card at 0x3bc and when I
try to run Axis, after configuring this laptop for the same card, I got
errors about missing
12 matches
Mail list logo
