Run it from a terminal and see if any errors are reported. Are you running master on Ubuntu 10.04?
JT On 2/5/2014 3:49 AM, Mark Tucker wrote: > I have been fiddling around with JT's Tutorials,in particular Gui3 shown > here http://gnipsel.com/linuxcnc/gui/index.html. > I can get this to run on 2.5.3 no problem,but when i try to run from 2.6 > pre it loads up and you can take the machine out of estop but the run > button stays greyed out? > I have tried this on both developer machines with the same result. > Am i missing something? > > > ------------------------------------------------------------------------------ > Managing the Performance of Cloud-Based Applications > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > Read the Whitepaper. > http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users