John I was running from RIP,Anyway as it is running on the beaglebone i think i can manage to work on it but thanks for trying to help.
On 05/02/14 11:21, John Thornton wrote: > I should have asked are you running it in a RIP or did you install it? > > JT > > On 2/5/2014 5:15 AM, Mark Tucker wrote: >> John >> >> Yes i was running master on 10.04 >> And there were no errors showing in the terminal. >> But strangely i just tried it on BBB machinekit and it is working. >> >> On 05/02/14 11:09, John Thornton wrote: >>> Run it from a terminal and see if any errors are reported. >>> >>> Are you running master on Ubuntu 10.04? >>> >>> JT >>> >>> On 2/5/2014 3:49 AM, Mark Tucker wrote: >>>> I have been fiddling around with JT's Tutorials,in particular Gui3 shown >>>> here http://gnipsel.com/linuxcnc/gui/index.html. >>>> I can get this to run on 2.5.3 no problem,but when i try to run from 2.6 >>>> pre it loads up and you can take the machine out of estop but the run >>>> button stays greyed out? >>>> I have tried this on both developer machines with the same result. >>>> Am i missing something? >>>> >>>> >>>> ------------------------------------------------------------------------------ >>>> Managing the Performance of Cloud-Based Applications >>>> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >>>> Read the Whitepaper. >>>> http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk >>>> _______________________________________________ >>>> Emc-users mailing list >>>> Emc-users@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> ------------------------------------------------------------------------------ >>> Managing the Performance of Cloud-Based Applications >>> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >>> Read the Whitepaper. >>> http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >>> >> ------------------------------------------------------------------------------ >> Managing the Performance of Cloud-Based Applications >> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >> Read the Whitepaper. >> http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ > Managing the Performance of Cloud-Based Applications > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > Read the Whitepaper. > http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users