Perhaps I should revert to 2.5.x but I moved to 2.6 for the 5i25 support.
I believe I am filling in all the tabs correctly. This is my first
go-around. I am trying to get a close-enough sample lcnc configuration that
I can start retrofitting an older vmc.
Mesa 5i25/7i77/7i73. Field power
Hi,
thanks for all your comments so fare.
0. move to home position (0°)
1. wait for low frequency trigger, a hardware or a software signal
2. within say 10° accelerate and synchronises to the 50Hz trigger
so that the 10° position is reached 20ms after the last trigger
and at a
On 23 Apr 2014, at 15:21, Marius Liebenberg mar...@mastercut.co.za wrote:
Bas
I have been following you posts on the temp control problem. I just
though, why dont you sense the temp with an external device and then use
a component to control the temperature. You could even use the pid
On Friday 25 April 2014 11:08:55 Florian Rist did opine:
Hi,
thanks for all your comments so fare.
0. move to home position (0آ°)
1. wait for low frequency trigger, a hardware or a software signal
2. within say 10آ° accelerate and synchronises to the 50Hz trigger
so that
That is a bug. When did u get 2.6? Thought I had already fixed this. I will
check soon.
Chris m
- Reply message -
From: Jason Burton lathebuil...@gmail.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] Error using pncconf in 2.6. Please, is
Hi
[Beaglebone black + BLDC contorller]
Alternatively the Pico PWM brushless servo amp only needs a single
channel of PWM:
http://www.pico-systems.com/acservo.html
A Gecodrive G320X [1] would be even easier to run from a Beaglebone as
it does not require a PWM/Dir but a Step/Dir signal.
kirk, a regular glass cutter will work for these, a glass cutter works
best on poly cells , mono cells are very fragile. i would recommend a
ready made panel or using unbroken tabbed cells. i am currently
experimenting with thinning of silicone for encapsulant . eva is very
difficult to get to
Hi Chris,
A week or two ago. Version 2.6.0~pre0.5418.gf74c5d3
Thanks! Both for maintaining pncconf and for confirming I am not going
crazy (at least on this topic...)
Sincerely,
Jason Burton
On Apr 25, 2014 3:49 PM, Chris Morley chrisinnana...@hotmail.com wrote:
That is a bug. When did u get
On 4/25/14 15:49 , Jason Burton wrote:
Hi Chris,
A week or two ago. Version 2.6.0~pre0.5418.gf74c5d3
Thanks! Both for maintaining pncconf and for confirming I am not going
crazy (at least on this topic...)
That version predates a couple of Chris Morley's recent pncconf bugfixes.
Try
Thanks for checking Seb.Jeff if this fixes it please let us know.
I'm glad you find pncconf useful.
Chris m
- Reply message -
From: Sebastian Kuzminsky s...@highlab.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] Error using pncconf in 2.6.
Thanks for checking Seb.Jeff if this fixes it please let us know.
I'm glad you find pncconf useful.
Chris m
- Reply message -
From: Sebastian Kuzminsky s...@highlab.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] Error using pncconf in 2.6.
Will do, thanks!
On Apr 25, 2014 5:02 PM, Sebastian Kuzminsky s...@highlab.com wrote:
On 4/25/14 15:49 , Jason Burton wrote:
Hi Chris,
A week or two ago. Version 2.6.0~pre0.5418.gf74c5d3
Thanks! Both for maintaining pncconf and for confirming I am not going
crazy (at least on this
12 matches
Mail list logo