On Tue, 22 Jul 2014 15:45:22 -0500, you wrote:
On Tue, Jul 22, 2014 at 08:57:21PM +0100, Steve Blackmore wrote:
On Tue, 22 Jul 2014 08:06:43 -0600, you wrote:
The new trajectory planner is not in 2.6. It's in the master branch and
will be part of 2.7.
Why?
The most recent bugfix in
On 07/23/2014 12:55 AM, Steve Blackmore wrote:
Just searched for it in Wiki --- Buildbot page errors with
Service Temporarily Unavailable
Good start.
I took it down this evening for an upgrade, to add more disk. It's back
now.
--
Sebastian Kuzminsky
On 23 July 2014 07:55, Steve Blackmore st...@pilotltd.net wrote:
Is there an up to date list of bugs or bug fixes anywhere for anything?
You can view all commits to the various branches here:
http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=shortlog;h=refs/heads/master
If you click on Robert
2014-07-23 9:55 GMT+03:00 Steve Blackmore st...@pilotltd.net:
Buildbot? - Where, How? If nobody is testing it still must be too
difficult to download/install.
Seriously? Since I do not remember anyone else complaining about this,
do you still think that everybody else are fools and you are the
Not sure if you have seen this but those playing with a Raspberry Pi's, your
touch screen has arrived.
http://www.dx.com/p/7-digital-touch-screen-drive-board-hdmi-vga-2av-for-raspberry-pcduino-cubieboard-318884
Cheers Wallace
I'm trying to get bldc init to run off machine on
rather than just once when I start axis and
reset estop the first time. My current hal
configuration ties bldc.0.init to iocontrol.0.user-enable-out
and bldc.0.init-done to iocontrol.0.emc-enable-in,
which may have been what pncconf suggested.
I
On 23 July 2014 17:46, Ralph Stirling ralph.stirl...@wallawalla.edu wrote:
I've tried, without success, connecting bldc.0.init to
halui.machine.is-on.
What is the manifestation of the unsuccess?
I suspect that the problem is that bldc doesn't un-synch when un-enabled.
If you look at
hi
some data from halmeter -
Pins
hm_2 5i20.0.encoder03 velocity
working 1200 (0 VDC)--5500 (5 VDC)
all move constantly -
///
hm_2 5i20.0. encoder 03 row count
439789346
move constantly
///
motion.adaptive-feed
Aram,
Does motion.adaptive-feed change value when you turn the potentiometer?
On Jul 23, 2014 2:34 PM, a k pccncmach...@gmail.com wrote:
hi
some data from halmeter -
Pins
hm_2 5i20.0.encoder03 velocity
working 1200 (0 VDC)--5500 (5 VDC)
all move constantly -
no
it just number-figure
it does not move
On Wed, Jul 23, 2014 at 2:41 PM, Stuart Stevenson stus...@gmail.com wrote:
Aram,
Does motion.adaptive-feed change value when you turn the potentiometer?
On Jul 23, 2014 2:34 PM, a k pccncmach...@gmail.com wrote:
hi
some data from halmeter -
On Wed, 23 Jul 2014 12:20:05 +0300, you wrote:
do you still think that everybody else are fools and you are the only
smart guy around here?
Do not be so helpless! I know that you are on this list for at least 4
years and this link has been mentioned here numerous times:
Then your links are not correct. You need to follow the pins and signals
and links from the pot to the pin. Do this with the halmeter.
Check the pot first. Do you see the voltage varying at the pot?
On Jul 23, 2014 4:53 PM, a k pccncmach...@gmail.com wrote:
no
it just number-figure
it does not
On 23 July 2014 23:33, Steve Blackmore st...@pilotltd.net wrote:
Sorry - but if it aint as simple as
Go to web page
Select release or latest beta
(with explanations of differences)
download
double click downloaded file
There is an alternative method to use the buildbot (and I just know
On 23 July 2014 23:55, Stuart Stevenson stus...@gmail.com wrote:
Then your links are not correct.
scale.0.in isn't connected to encoder.03.velocity
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
Success is bldc init on startup of axis, and enable on machine on. This is the
hal fragment:
net machine-is-on halui.machine.is-on pid.0.enable
net estop-out iocontrol.0.user-enable-out bldc.0.init
hm2_7i43.0.3pwmgen.03.enable
net all-are-init bldc.0.init-done = iocontrol.0.emc-enable-in
On 24 July 2014 01:13, Ralph Stirling ralph.stirl...@wallawalla.edu wrote:
Looking at bldc.comp (version 1.3.2) lines 475 to 483, it would appear that a
new rising
edge on init after init-done is high should restart things:
if ((personality 0x05) == 4){
if (init !old_init
In_type is 4. My init lasts forever, since I can't get estop to release
or machine on to go true.
-- Ralph
From: andy pugh [bodge...@gmail.com]
Sent: Wednesday, July 23, 2014 5:27 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] pins for
On 24 July 2014 01:39, Ralph Stirling ralph.stirl...@wallawalla.edu wrote:
In_type is 4. My init lasts forever, since I can't get estop to release
or machine on to go true.
It looks like a standoff, with init-done not going true until the
machine is on, and the machine not going on until
I need to read an ADC with my 7i43 card, and am wondering
about the status of the SSPI and BSPI interface projects.
The wiki mentions that these might be available in 2.6, and I see
a bspi.c file in the 2.5 drivers, but don't find much documentation
or indication of how it works. I just want to
On 24 July 2014 02:26, Ralph Stirling ralph.stirl...@wallawalla.edu wrote:
The wiki mentions that these might be available in 2.6, and I see
a bspi.c file in the 2.5 drivers, but don't find much documentation
or indication of how it works. I just want to read a simple single
channel ADC like
Thanks, Andy, I'll try that. Compiling firmware isn't a problem. I do have
two different projects going on at the moment, but I'll probably shelve the
effort to fix the slight annoyance of restarting axis to get the bldc to
reinitialize.
I may have some more questions about setting up the bspi
On Jul 23, 2014 5:35 PM, Steve Blackmore st...@pilotltd.net wrote:
On Wed, 23 Jul 2014 12:20:05 +0300, you wrote:
do you still think that everybody else are fools and you are the only
smart guy around here?
Do not be so helpless! I know that you are on this list for at least 4
years and
On Wednesday 23 July 2014 22:48:50 Stuart Stevenson did opine
And Gene did reply:
On Jul 23, 2014 5:35 PM, Steve Blackmore st...@pilotltd.net wrote:
On Wed, 23 Jul 2014 12:20:05 +0300, you wrote:
do you still think that everybody else are fools and you are the
only smart guy around here?
23 matches
Mail list logo
