Re: [Emc-users] raspi, increasing gui's bit depth

On Tuesday 20 December 2016 14:06:25 Chris Albertson wrote: > I'm running a different Linux distribution so I can't tell you exactly > where to make the change but generally these color selections are user > selectable as "Theams".So you picks a team called "classic" or > "monochromes" or

Re: [Emc-users] EDM machining, user interface

Thanks! I guess I have to start dig thru manual to figure out how old machine is run. I have a few hours each night and tonight I would be happy if I could a gladevcp panel up and running. On Tue, 20 Dec 2016 23:54:19 +0700 TJoseph Powderly wrote: > Nicklas > 'ram' is

Re: [Emc-users] raspi, increasing gui's bit depth

I'm running a different Linux distribution so I can't tell you exactly where to make the change but generally these color selections are user selectable as "Theams".So you picks a team called "classic" or "monochromes" or "fall colors" . You can edit one files and make your own but likely

[Emc-users] raspi, increasing gui's bit depth

Greetings all; It looks like the default gui settings for LXDE which is the gui foundation (I think, but raspian may have cheery picked too) used on these raspian jessie installs, has a poorly set set of color values. When using a pulldown menu system such as LCNC uses, I can only

Re: [Emc-users] EDM machining, user interface

Nicklas 'ram' is another way to say 'sink' eroding, the kind that uses a shaped tool 'wire' is for cutting thru a plate 'tube' or 'drill' or hole popper' for holes 'grinder' for for open surfaces multiple solenoids can be used to control flow if a series of ports are on a single feeding pipe then

Re: [Emc-users] Fanuc A06B-6058-H322 Servo Amp Part Number

On 12/20/2016 04:15 AM, Klemen Živkovič wrote: > Maybe not related to this but am I seeing correctly that you are using 126V > 6A DC current? I am looking for 220V AC to 80V 8A DC transformer. Where can > I buy it? > > > The motor "TYPE" is A06B-0134-B002, and "NO." is G-846379. 126 V, 8 >

Re: [Emc-users] EDM machining, user interface

Nicklas hello 2 basic motion types are useful ( at least 2 ) 1 is jumping, a way to remove debris, the debris generated in erosion needs to be removed, it lowers the conduction of the environment and disturbs a voltage drop based control flushing thru the tool is very good but it is

Re: [Emc-users] Fanuc A06B-6058-H322 Servo Amp Part Number

On 12/20/2016 04:15 AM, Klemen Živkovič wrote: > Maybe not related to this but am I seeing correctly that you are using 126V > 6A DC current? I am looking for 220V AC to 80V 8A DC transformer. Where can > I buy it? > > At least, in the US, there are things called "step down transformers" to give

Re: [Emc-users] EDM machining, user interface

> I have a large Makino wire EDM with a working envelope of 1200x900x300mm with > UV axes for tapered cutting. I also am looking to update the machine but > have other projects in front of it. One neat feature of my wire machine is > edge finding and locating the center of a hole if

Re: [Emc-users] EDM machining, user interface

Hi Nicklas, I have a large Makino wire EDM with a working envelope of 1200x900x300mm with UV axes for tapered cutting. I also am looking to update the machine but have other projects in front of it. One neat feature of my wire machine is edge finding and locating the center of a hole if

Re: [Emc-users] EDM machining, user interface

Yes I am retrofitting an old EDM machine. It have been a year two before I started but finally I have all the needed hardware. As is now I am starting to think about user interface and could vaguley remember somebody talked about it earlier, worst problem is probably I am not totally sure what is

Re: [Emc-users] EDM machining, user interface

Ni⁣cklas, Could you give me details etc, and I can get up to date, and join the discussion Sarah Sent from BlueMail ​ On 19 Dec 2016, 20:16, at 20:16, Nicklas Karlsson wrote: >Finally I have all the necessary hardware parts, some are still on >desktop not

Re: [Emc-users] I think its time to issue a warning about sandisk 32GB supposedly 2x speed of a samsung sd card

Am 20.12.2016 um 01:35 schrieb Bertho Stultiens: > On 12/20/2016 01:10 AM, Gene Heskett wrote: >> What has been other raspi users experience? Is a sandisk crap? > The *biggest* problem is a read/write file-system on an SD card. That > kills about any cards within 1..3 months for me (especially

Re: [Emc-users] Fanuc A06B-6058-H322 Servo Amp Part Number

Maybe not related to this but am I seeing correctly that you are using 126V 6A DC current? I am looking for 220V AC to 80V 8A DC transformer. Where can I buy it? Regards On 20 Dec 2016 4:15 a.m., "Jon Elson" wrote: On 12/19/2016 01:35 PM, Steve from Tube Gauge wrote: >