On 8/27/2019 1:36 PM, Marius Liebenberg wrote:
Hi all
I need to set a 5i25 up as a dual lpt port. I want to replace my
mill installation with Path Pilot and I need the pin and bit
files to do that.
Does anyone know where I can go look for the files please?
http://freeby.mesanet.com/so
Greetings all;
Trying to troubleshoot my failed G0704. It apparently took a hit while I
was in the shop with all sorts of tubing etc stuck here and there
watching a heart thats working at about 30%. They'll fix that with a new
valve next month.
Got a pair of control boxes I've assembled. Power
On Wed, 28 Aug 2019 at 17:25, Marius Liebenberg
wrote:
>
> Is there a way to build your own bit files?
There are at least 2 ways.
You can use the command-line tools that exist in the LinuxCNC version of
the Hostmot2 repository:
https://github.com/LinuxCNC/hostmot2-firmware
(Some info in the re
On Wednesday 28 August 2019 14:48:14 andy pugh wrote:
> On Wed, 28 Aug 2019 at 17:25, Marius Liebenberg
>
>
> wrote:
> > Is there a way to build your own bit files?
>
> There are at least 2 ways.
>
> You can use the command-line tools that exist in the LinuxCNC version
> of the Hostmot2 repositor
On Wednesday 28 August 2019 15:13:29 Gene Heskett wrote:
> On Wednesday 28 August 2019 14:48:14 andy pugh wrote:
> > On Wed, 28 Aug 2019 at 17:25, Marius Liebenberg
> >
> >
> > wrote:
> > > Is there a way to build your own bit files?
> >
> > There are at least 2 ways.
> >
> > You can use the comm
On Wed, 28 Aug 2019 at 20:31, Gene Heskett wrote:
In looking at what I have, vs what I need, I need a bit file for 5i25's
> with a 7i76D driver on P3, and a std parport bob on P2.
There are pre-existing 5i25_g540_7i76.bit and 5i25_7i76_g540.bit files.
(7i76D is the same pinout as 7i76)
--
atp
On Wednesday 28 August 2019 15:57:04 andy pugh wrote:
> On Wed, 28 Aug 2019 at 20:31, Gene Heskett
> wrote:
>
> In looking at what I have, vs what I need, I need a bit file for
> 5i25's
>
> > with a 7i76D driver on P3, and a std parport bob on P2.
>
> There are pre-existing 5i25_g540_7i76.bit and
I've finally had some time to get back to the CNC upgrade and I copied the test
machine config folder to the Mill PC. Once I got the correct parallel port
cable straightened around to actually not fault on Limit switches the jog
buttons created motion.
I can report that the Y axis behaved real
http://freeby.mesanet.com/5i25_7i76_5abob.bit
7I76 on P3, Cheap Ebay "5 Axis" BOB on P2
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
___
Emc-users
Now a new problem or not so much a problem but I can't figure out how to fix it
and it's probably right in front of my nose.
The Z axis is a knee, not a quill and on the 7i92H the knee is now going in the
wrong direction. On the para
On Wednesday 28 August 2019 20:24:42 John Dammeyer wrote:
> I've finally had some time to get back to the CNC upgrade and I copied
> the test machine config folder to the Mill PC. Once I got the correct
> parallel port cable straightened around to actually not fault on Limit
> switches the jog bu
On Wednesday 28 August 2019 20:25:52 Peter C. Wallace wrote:
> http://freeby.mesanet.com/5i25_7i76_5abob.bit
>
> 7I76 on P3, Cheap Ebay "5 Axis" BOB on P2
>
Eggselant Peter, just what I wanted. Twice. :)
> Peter Wallace
> Mesa Electronics
>
> (\__/)
> (='.'=) This is Bunny. Copy and paste bunny i
Gene,
You've got it backwards. The parallel port version is correct which is why
that line is there.
> > setpparport.0.pin-07-out-invert 1
> remove the above line, or set it false
> > net zdir=> parport.0.pin-07-out
Peter Wallace suggested I do this:
"If you are usin
You must have a substantial amount of backlash? The backlash is taken out
at max axis acceleration. that is why you need to have 2X acc for the
stepgen_maxaccel. There is a chance that the axis could be accelerating
and the backlash taken out at the same time causing 2x the acceleration
being s
Yeah the backlash is pretty bad but even back in May 2007 when I bought it the
cost for all that mass was quite low. Now Grizzly doesn't even sell that model
anymore and the closest unit is almost double. Add an exchange rate of over
30% and installing ball screws will be cheap and has always
One other little detail that has shown up once the LinuxCNC was run with the
7i92H configuration. And may not be the 7i92H
The AXIS display shows that 3D perspective of the tool path. With the parallel
port version the tool image (a grey cone) is in line with the Z axis. For some
reason the
On Wed, 28 Aug 2019, John Dammeyer wrote:
Date: Wed, 28 Aug 2019 19:22:09 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
Gene,
You've got it backwards. The parallel port version
On Wednesday 28 August 2019 22:22:09 John Dammeyer wrote:
> Gene,
>
> You've got it backwards. The parallel port version is correct which
> is why that line is there.
>
> > > setp parport.0.pin-07-out-invert 1
> >
setp to 1 is also true, setp to 0 is false. It may be right or wrong, but
one
On Wednesday 28 August 2019 23:18:28 John Dammeyer wrote:
> One other little detail that has shown up once the LinuxCNC was run
> with the 7i92H configuration. And may not be the 7i92H
>
> The AXIS display shows that 3D perspective of the tool path. With the
> parallel port version the tool imag
This what the halcmd produced for the Y axis.
28 bit IN TRUE hm2_7i92.0.stepgen.02.control-type
28 s32 OUT-31361 hm2_7i92.0.stepgen.02.counts
28 float OUT 0 hm2_7i92.0.stepgen.02.dbg_err_at_match
28 float OUT 0 hm2_7i92.0.stepge
On Wed, 28 Aug 2019, John Dammeyer wrote:
Date: Wed, 28 Aug 2019 21:05:58 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
This what the halcmd produced for the Y axis.
28 bit
> > Do I just add this to the HAL file?
> > setp hm2_7i92.0.stepgen.02.direction.invert_output TRUE
> >
> > Is it that simple?
> > John
>
> It is that simple if you are using 2.8 and above
>
Well that explains it. Help | About says LinuxCNC/Axis 2.7.14
I'm good with changing the sign on th
On Wednesday 28 August 2019 23:18:28 John Dammeyer wrote:
> Yeah the backlash is pretty bad but even back in May 2007 when I
> bought it the cost for all that mass was quite low. Now Grizzly
> doesn't even sell that model anymore and the closest unit is almost
> double. Add an exchange rate of o
> -Original Message-
> From: Gene Heskett [mailto:ghesk...@shentel.net]
> Sent: August-28-19 9:32 PM
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] MESA 7i92H Saga
>
> On Wednesday 28 August 2019 23:18:28 John Dammeyer wrote:
>
> > Yeah the backlash is pretty bad but
24 matches
Mail list logo