Greetings all;
In thinking about this vise screw project, I see a need to be able to
restart where I left off if I stop it to replace a dull or broken tool.
I'll have a TLO corrector at the startup of course, but it would be handy
to save each new position as it progresses thru the loop, marki
That link for electromate talks about galil motion control products whose
website is https://www.galil.com/
https://www.electromate.com/products/motion-automation-controllers/motion-controllers-pci-pc-sol-104-isa-bus/
Galil used to have pricing online (could be a few years back) and when I
tried
On Monday, 28 March 2022 18:10:25 EDT andy pugh wrote:
> On Mon, 28 Mar 2022 at 20:14, Dominic Francisco
wrote:
> > Who can help us find a couple of Servo-To-Go motion control
> > boards?
>
> A bit of digging suggests that the servo-to-go trademark now belongs
> to Electromate.
>
> http
On Mon, 28 Mar 2022 at 20:14, Dominic Francisco wrote:
> Who can help us find a couple of Servo-To-Go motion control boards?
A bit of digging suggests that the servo-to-go trademark now belongs
to Electromate.
https://www.electromate.com/products/motion-automation-controllers/motion-control
On Mon, 28 Mar 2022 at 20:14, Dominic Francisco wrote:
>
> Big Howdy to the EMC Group:
> Who can help us find a couple of Servo-To-Go motion control boards?
Do you have a PC with an ISA bus to run them?
Also, StG is quite an expensive board, compared to (for example)
http://store.mesanet.com
Big Howdy to the EMC Group:
Who can help us find a couple of Servo-To-Go motion control boards? we
tried EMing & calling them back in Indiana to no avail. we are now stuck on
our Monarch VMC-75 retrofit! the STG Board offered 8-axis,
full-time control, with maximum servo up-date time of 1 ms! s
https://www.youtube.com/watch?v=WnQV8E8Ja5E
On Mon, 28 Mar 2022 at 12:23, andy pugh wrote:
> On Mon, 28 Mar 2022 at 03:29, Thaddeus Waldner wrote:
>
> > Ah! I just saw that P0 is for the active coordinate system. Is P
> optional?
>
> I think that 0 is assumed if P is omitted
>
> --
> atp
> "A m
Greetings all;
When I have my rpi4 running raspi's buster-armhf, the key is fine and I
have no problemms updateing to master.
Plug in and boot to raspi's buster-arm64, and both apt and synaptic claim
the key is unsigned and refuses to add the linuxcnc list to the repo's
shown. Is it me, or th
Thanks but too late now. We'll see if I'm lucky.
-Original Message-
From: andy pugh
Sent: March 28, 2022 8:42 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Homebuilt encoder
On Mon, 28 Mar 2022 at 03:14, wrote:
>
> The Omron E6D-C series are rated at 12,000 rpm The
On Mon, 28 Mar 2022 at 03:14, wrote:
>
> The Omron E6D-C series are rated at 12,000 rpm
> The Omron E6H-C series are rated at 10,000 rpm
>
> I ordered an E6H from eBay with delivery promised in a month.
You need to be a little careful with those, some have no index. The
advertisers don't appear t
On Mon, 28 Mar 2022 at 03:29, Thaddeus Waldner wrote:
> Ah! I just saw that P0 is for the active coordinate system. Is P optional?
I think that 0 is assumed if P is omitted
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical genius
11 matches
Mail list logo
