You can mount the OpenRail onto an angle iron (or flat bar) to your liking and
then mount the angle iron to any size extrusion. Thats what I have done, and it
work great.
Sam.
On 2013-05-09, at 6:17 PM, BRIAN GLACKIN wrote:
> How about inline skate wheels inside and upturned piece of angle i
Hello,
I just got myself a Mitutoyo 192-002 touch probe but didnt get any
manuals with it. I was thinking on trying to modify the 8-pin
connector on the probe to my CNC that support a 24v probe port. Anyone
have any idea on the electrical of this to modify it for my CNC?
Thanks,
Sam.
---
I have no clue, how can I find that out?
Sam.
On Mon, Mar 4, 2013 at 1:01 PM, Jon Elson wrote:
> Shaffin Bhanji wrote:
>> Hello,
>>
>> I have a BP VMC1000, 22 TC and Simodrive 611 controls on them. In
>> order to upgrade the BP control software I have been told to u
Hello,
I have a BP VMC1000, 22 TC and Simodrive 611 controls on them. In
order to upgrade the BP control software I have been told to upgrade
to a new computer board, and the costs just keep adding on.
I was thinking of an option to change the BP control software to EMC2.
Has anyone ventured into
Hello,
I am trying to configure EMC, and what I run into is that when I move an
axis (say x-axis) 7", the machine actually moves 3.5". I have the
following leadscrew 3/8"-12tpi using a Xylotex board. Can someone guide
me what I may be doing wrong?
Thanks,
Sam.
---
Has anyone been able to compile, port the EMC stack onto OpenSuse with
the RT kernel?
Thanks,
Shaffin.
--
Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)!
Finally, a world-class log management solutio
Thanks Chris, it seems the problem was on my ISP's SMTP side of things.
Shaffin.
On 01/23/2011 01:41 PM, Chris Radek wrote:
> On Sun, Jan 23, 2011 at 01:18:30PM -0500, Shaffin Bhanji wrote:
>> For some reason some posts that I have are not to be seen?
> Without information su
For some reason some posts that I have are not to be seen?
Shaffin.
--
Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)!
Finally, a world-class log management solution at an even better price-free!
Dow
Hello,
I have about 25" of t-slot table top that is made out of extruded
aluminum if anyone is interested. The table top is composed of 4 pieces
each a little over 6-1/4" wide and 48" long. The attached diagram
provides the dimension of each piece in metric (mm). I am looking for
about $300 f
t;
> John Kasunich
> emc-users list administrator
>
>
> On Fri, 31 Dec 2010 09:07 -0500, "Shaffin Bhanji"
> wrote:
>> Hello,
>>
>> I did not know how to extend this offer but was wondering if anyone
>> would be interested in:
>>
>> (2) I
Hello,
I did not know how to extend this offer but was wondering if anyone
would be interested in:
(2) I have 2 copies of the NEW BobCAD-CAM v23 Standard Mill software.
Theses sell for USD $2495 each but am willing to take USD $499 + $19
shipping anywhere in the USA.
(3) I have 2 copies of th
I have been in the open source arena for a number for years now in which
investors come and go - some even successful based on the business plan
and innovation. In my opinion the only way this kind of investment idea
to make it a viable business is to fork the the project, re-brand it,
and cont
Hello,
I am thinking to get the 4 axis electronics kit that CNCRouterParts
sells -
http://www.cncrouterparts.com/product_info.php?cPath=22&products_id=75
Anyone happen to get this configured correctly to run a dual drive
y-axis system?
I have had good success using the Xylotex 3-axis system b
Hello to all the gurus,
I am facing a problem with my new built CNC platform. Before I describe
my platform let me share a bit about my design. The platform is about
40"x40" square using the ABEC7 bearings from CNCRouterParts
(http://www.cncrouterparts.com/product_info.php?cPath=21&products_i
Hello,
I am currently using the Xylotex 3-axis package with 4 motors, can we
run 2 stepper motors on a single y-axis? Has anyone configured that? Any
ideas, options on configuring such a setup?
Thanks,
Sam.
--
This
Hello All,
I have a question that I thought that I would bounce off everyone in
this forum regarding a DRO project for my KING PDM-30 Milling/Drilling
Machine. I know that this is an EMC forum but with the varied level of
expertise on the forum I wanted to try my luck.
SO my question is has an
e router I use on a small
> gantry CNC router.
>
> Craig
>
>
>
> On 6/21/2010 5:39 AM, Shaffin Bhanji wrote:
>
>> Hello Gene,
>>
>> What about the Bosch Colt (trim router), would that be any better? Going
>> to a PC690 would be an option but not su
une 2010, Shaffin Bhanji wrote:
>
>> Hello,
>>
>> I am working on cutting and etching on aluminum, due to very fine detail
>> work I have resorted to using a Dremel tool (with 1/8" shank) on my CNC,
>> has anyone had any success using a Dremel tool to work on
Hello,
I am working on cutting and etching on aluminum, due to very fine detail
work I have resorted to using a Dremel tool (with 1/8" shank) on my CNC,
has anyone had any success using a Dremel tool to work on aluminum? If
so, can you recommend where to get some good 1/8" shank end mills for
Ah, that sounds a bell. So to get full 5 inch of travel I just set the
microstep to 8? If so, is there any danger in doing that?
Shaffin.
On 06/14/2010 08:05 PM, Stephen Wille Padnos wrote:
> Shaffin Bhanji wrote:
>
>> I have not changed the jumpers on the board that I believ
I have not changed the jumpers on the board that I believe by default
are set for 1/8 microsteps
Shaffin.
On 06/14/2010 07:53 PM, Ries van Twisk wrote:
> You are sure you don't have 10 times micro-stepping?
>
> just a guess...
> Ries
>
>
> On Jun 14, 2010, at 6:4
Hello,
I need some serious help getting either my math incorrect or my
configuration. I am using the step-configuration wizard to setup my
Xylotex 3-axis cnc platform. I have a 420oz.
I am having a problem setting up my 3 axis. The configuration that I am
using is:
Steps per revolution = 200
Hello,
I need some serious help getting either my math incorrect or my
configuration. I am using the step-configuration wizard to setup my
Xylotex 3-axis cnc platform. I have a 420oz.
I am having a problem setting up my 3 axis. The configuration that I am
using is:
Steps per revolution = 200
Hello,
Can someone recommend a good CAM/Toolpath software that natively runs
on Linux/Ubuntu along side of EMC2.
I am currently in the process of coverting my DXF file to generate the
g-code but would like a graphical tool to help me achieve that. I am
not sure what the defacto standard is.
Than
Hello,
I am trying to setup EMC2 with my Xylotex XS3525/8S3 - 3 Axis - 425oz.
Motors Kit. Can someone please share the EMC2 configuration file with me
to get a head start.
Thank you all,
Shaffin.
--
__
Hello out there, I am new to the EMC2 list - just testing to see whether
my emails com through, please ignore.
Shaffin.
--
___
Emc-users mailing list
Emc-users@lists.sourcefo
26 matches
Mail list logo