Good day,
Thanks for the effort to show your excellent DIY lathe/grinder.
cheers john
--
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel
Yes cannot access
john
> Date: Thu, 9 Jul 2015 21:44:01 -0500
> From: jimcraig5...@windstream.net
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] LinuxCNC website
>
> Is anyone else having issues with the LinuxCNC website?
>
> ---
Good day,
Is it not possible for the lathe ,to have more than one z home position the
same as fitted,
on my old mazak m3 lathe , which has six z zero home positions.
Regards to all john
> From: ghesk...@wdtv.com
> To: emc-users@lists.sourceforge.net
> Date: Wed, 2 Sep 2015 09:36:18 -0400
> Sub
repeatable zero position.
Regards john
> From: ghesk...@wdtv.com
> To: emc-users@lists.sourceforge.net
> Date: Wed, 2 Sep 2015 23:39:04 -0400
> Subject: Re: [Emc-users] Supported Servo Motors
>
> On Wednesday 02 September 2015 21:33:53 john mcintyre wrote:
>
> > Good
Good day Gene,
Loctite is the answer but there are many grades of loctite make sure you use
the right type for the job,
You will need to know the size of the bolt/nut this governs the type of Loctite
to use, also do you wish to
remove the bolt,
I used bearing mount Loctite, when fitting steel b
Good day
I usually if possible wrap the shaft in a heavy plastic sheet first, as the
adhesive tends to cling to the
swarf ,then wrap duct-tape over the lot.
Regards john
> From: bodge...@gmail.com
> Date: Mon, 7 Sep 2015 11:09:42 +0100
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users
Good Day
Top job really looks the part.
Has the same shift pattern as my Matsuura MV 100V.
Cheers john
> Date: Tue, 10 Nov 2015 13:00:03 -0500
> From: petefro...@gmail.com
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Tool changer finally working on our mill project
>
> Ver
Good Day All,
Problems with machining sticky material.
I find wd40 or crc penetrating fluid in the pressure pack and use the fine tube
nozzle to direct the
spray right onto the cutting tip .
This is good for all sticky materials as it stops the material (soft aluminium)
building up on the cut
emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Anybody have an idea how...
>
> On 24.09.16 18:04, john mcintyre wrote:
> > Machine the boss and hub to a firm slide fit ( stops misalignment in
> > assemble) then use Loctite 680 or similar. prep spay both surfaces
> > w
Good Day Gene,
Best wishes for your 82nd birthday .
Many thanks for your effort and wit .
Cheers , john
> From: ghesk...@shentel.net
> To: emc-users@lists.sourceforge.net
> Date: Tue, 4 Oct 2016 15:24:33 -0400
> Subject: Re: [Emc-users] Happy 82nd to me,and the latest version of my
Good Day All
Many thanks for the pictures and keeping the old skills alive.
john
> From: bodge...@gmail.com
> Date: Fri, 10 Oct 2014 00:14:27 +0100
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Oscilloscope + logic analyzer (PC based)
>
> On 9 October 2014 19:45, Gene Heskett
Good Day,I suggest that a side and face cutter with a dia equal to the radius
of the dog clutch ramp .john
> From: bodge...@gmail.com
> Date: Mon, 13 Oct 2014 12:35:46 +0100
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] How to machine
>
> http://www.geutskens.eu/neracar/image
tooth. cheers
john
> From: bodge...@gmail.com
> Date: Mon, 13 Oct 2014 13:12:51 +0100
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] How to machine
>
> On 13 October 2014 13:07, john mcintyre wrote:
> > Good Day,I suggest that a side and face cutter
Good day Gene ,
Thanks for your post, all the best, the 7 mile distance travelled, is not
important as the mind can travel to infinity.
cheers john
From: Gene Heskett
Sent: Saturday, 3 December 2016 1:41 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [E
Good day,
Use soft aluminium as the anvil for die cutting shims
john
From: Gene Heskett
Sent: Saturday, 17 December 2016 6:07 AM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] axis screw has 5 or 6 thou of end play, usual fix?
On Friday 16 Decemb
Good stuff lanolin straight of the sheep's back greasy wool.
john
From: Dave Cole
Sent: Sunday, 18 December 2016 4:44 AM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] axis screw has 5 or 6 thou of end play, usual fix?
On 12/16/2016 6:50 PM, Gen
Good day ,
We also have problems with hardened threads if they are tightened up
without lubrication, we use the stainless steel anti seize paste.
Just a thin smear is all that is required .
The male thread, we have cleaned up with a small hand grinder, pita.
Usually the nut has to be replac
Good day Gene,
Our best wishes to you both.
john
From: Gene Heskett
Sent: Tuesday, 7 February 2017 2:19 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Raspberry Pi & 7i90HD again
On Monday 06 February 2017 21:22:26 Gene Heskett wrote:
> On Mo
Good day Gene ,
Wishing Dee and your self the very best luck for the future.
cheers john
From: Gene Heskett
Sent: Saturday, 18 February 2017 2:36 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] M. P. Jones has deal on manual pulse generator
On
Good day Gene ,
Your saga continues, you must be related to a bulldog😊 ,once locked on it
cannot let go.
All the best john
From: Gene Heskett
Sent: Sunday, 4 June 2017 9:47 AM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] RPI saga continues - S
Good Day All,
The international workshop manual suggests that bore and fit oversize pistons.
We always used cylinder boring bar such as Van Norman .
These boring bars only rotate a cutter at the bottom of the boring bar,
also there is adjustable traveling steadies ( called cats paws ) that s
Good Day All,
I have a mazak M3 NC lathe,that I hope to convert
to linux cnc control, and need some information or direction to enable the 16
speed gear change to operate under linux.
Regards john
--
rom: bodge...@gmail.com
> Date: Thu, 27 Jun 2013 12:18:58 +0100
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] 16 speed gear change
>
> On 27 June 2013 02:04, john mcintyre wrote:
>
> > I have a mazak M3 NC lathe,that I hope to convert
> > to
From: johnan...@live.com.au
To: tcninj...@yahoo.com
Subject: RE: [Emc-users] Servo bearing
Date: Sun, 14 Jul 2013 11:40:06 +1030
Good Day, All
I believe on the early permanent magnets used in steam trains and car magneto
the magnets would lose some of theremagnetism when dismantled . As we a
Good day ,On some recirculating ball screws , under sized balls , were spaced
between the correct balls to almost completely fill the ball nut.Cheers john
> Date: Sat, 24 Aug 2013 11:38:53 -0400
> From: jcyoung...@gmail.com
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] re bal
A serious EFFORT well done john
> From: bodge...@gmail.com
> Date: Thu, 2 Jan 2014 10:44:33 +
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Off topic.
>
> Lathe related, but not a single CNC machine was used. Tthis is what I
> did with my Christmas holiday:
> http://bodgesoc.b
Good Day,
Message in this day and age is NOT inappropriate.Thanks for your posts.But
always remember life smile in many ways .John
> From: kwall...@wallacecompany.com
> To: emc-users@lists.sourceforge.net
> Date: Mon, 8 Oct 2012 16:26:12 -0700
> Subject: [Emc-users] A Fork In The Road
>
> Ple
27 matches
Mail list logo