Good day,The clutch teeth appear to have a concave ramp and and the side of the cutter will approximate this curveand the end of the cutter will machine the perpendicular tooth face , you will need to adjust the cutter depth and position so that the side of the cutter does not cut the next tooth. cheers john
> From: bodge...@gmail.com > Date: Mon, 13 Oct 2014 13:12:51 +0100 > To: emc-users@lists.sourceforge.net > Subject: Re: [Emc-users] How to machine.... > > On 13 October 2014 13:07, john mcintyre <johnan...@live.com.au> wrote: > > Good Day,I suggest that a side and face cutter with a dia equal to the > > radius of the dog clutch ramp > > I am not 100% sure what you are suggesting, can you elaborate? > > As I see it the acute angle between the ramp face and the dog face is > the tricky bit. > > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > ------------------------------------------------------------------------------ > Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer > Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports > Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper > Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer > http://p.sf.net/sfu/Zoho > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
