ant
to replace randomly. That never really solves problems. Just hides them until
some other time.
John
> -Original Message-
> From: Sam Sokolik [mailto:samco...@gmail.com]
> Sent: August-07-21 11:52 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users]
Are these running single ended? Have you tried it with the spindle
running?
sam
On Sat, Aug 7, 2021 at 11:33 AM John Dammeyer
wrote:
> Hi Jon,
> > From: Jon Elson [mailto:el...@pico-systems.com]
> > On 8/4/21 1:53 AM, John Dammeyer wrote:
> > > In fact, a bit more work just now shows that the
Hi Jon,
> From: Jon Elson [mailto:el...@pico-systems.com]
> On 8/4/21 1:53 AM, John Dammeyer wrote:
> > In fact, a bit more work just now shows that the X axis is losing position
> > in the positive(?) direction. So on each return to X0 after a
> bunch of jogging back and forth (even without bac
On 2021-08-05 06:13, John Dammeyer wrote:
How does one know what size tabs and how many?
I view this as a mystical black art.
For me, the basic idea is to
(a) support the part to prevent damage when it separates from the
parent, to stop it catching the cutter for example. In that case,
posit
or setting it up.
How does one know what size tabs and how many?
John
> -Original Message-
> From: marcus.bow...@visible.eclipse.co.uk
> [mailto:marcus.bow...@visible.eclipse.co.uk]
> Sent: August-04-21 11:59 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re
(EMC)" Subject: Re: [Emc-users] Something
went wrong. John,Two suggestions:1. I have experienced the same symptoms in the
past, and it turned out to be the bolts securing my Y axis nut (which has a
square flanged base) moving under the inertial load of the table.2. My approach
to machini
John,
Two suggestions:
1. I have experienced the same symptoms in the past, and it turned out
to be the bolts securing my Y axis nut (which has a square flanged base)
moving under the inertial load of the table.
2. My approach to machining the part might be to not cut the box section
to an
John
> -Original Message-
> From: Roland Jollivet [mailto:roland.jolli...@gmail.com]
> Sent: August-04-21 8:19 AM
> To: Enhanced Machine Controller (EMC)
> Subject: [Emc-users] Something went wrong.
>
> I would send the .dxf to the laser shop and collect the cut-and-bent pa
/4") cutter.
Suggestions?
Thanks
John
-Original Message-
From: John Figie [mailto:zephyr9...@gmail.com]
Sent: August-03-21 11:59 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Something went wrong.
Speaking of backlash. My tiered old Bridgeport has about 0.002&qu
>
> > -Original Message-
> > From: John Figie [mailto:zephyr9...@gmail.com]
> > Sent: August-03-21 11:59 AM
> > To: Enhanced Machine Controller (EMC)
> > Subject: Re: [Emc-users] Something went wrong.
> >
> > Speaking of backlash. My tiered old
---
From: John Figie [mailto:zephyr9...@gmail.com]
Sent: August-03-21 11:59 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Something went wrong.
Speaking of backlash. My tiered old Bridgeport has about 0.002" of backlash
in the ballscrews. So if circular interpolation is used there i
To: 'Enhanced Machine Controller (EMC)'
> Subject: Re: [Emc-users] Something went wrong.
>
> That's a good suggestion John F. Thanks. I did do some more playing around
> and it's clear the part flexing and the backlash both
> were at fault especially with the pl
...@gmail.com]
> Sent: August-03-21 11:59 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Something went wrong.
>
> Speaking of backlash. My tiered old Bridgeport has about 0.002" of backlash
> in the ballscrews. So if circular interpolation is used there
Speaking of backlash. My tiered old Bridgeport has about 0.002" of backlash
in the ballscrews. So if circular interpolation is used there is a small
bump at each 90 degrees of the circle. But if I make the finish pass first
clockwise and then repeat counter clockwise the imperfections are much
smal
You might try the run again without the backlash compensation in LCNC to
get a feel of what it is actually doing.
--J. Ray Mitchell Jr.
“I predict future happiness for Americans, if they can prevent the
government from wasting the labors of the people under the pretense of
taking care of them.”
On Tuesday 03 August 2021 05:31:56 andy pugh wrote:
> On Tue, 3 Aug 2021 at 07:58,
wrote:
> > I draw all this from my own ballscrew conversion of my own mill,
> > some 20 years ago. If I was doing it again, I would use two nuts,
> > with spring tension between the pair
>
> Springs might not be t
On Tue, 3 Aug 2021 at 07:58, wrote:
> I draw all this from my own ballscrew conversion of my own mill, some 20
> years ago. If I was doing it again, I would use two nuts, with spring
> tension between the pair
Springs might not be the best way. The common way to tension double
nuts is to (basica
On 2021-08-03 04:43, John Dammeyer wrote:
So there are other issues before I can start on the Ball
Screw Conversion.
You might bear in mind that ballscrews which use a single nut don't have
zero backlash. They do have consistent backlash over the length of the
screw - until they wear, of co
x27;t start. Not close enough to target velocity. So there are
other issues before I can start on the Ball Screw Conversion.
John
> -Original Message-
> From: jrmitchellj [mailto:jrmitche...@gmail.com]
> Sent: August-02-21 5:42 PM
> To: Enhanced Machine Controller (EMC)
&
First, if you have a lot of backlash in the X & Y movements, you should
avoid climb milling. When the cutter grabs the work, it will take up the
backlash (and maybe break the cutter)
As for the way you have the work in the vice, I would ditch the round
stock, and clamp it lower in the vice. I thi
Hi Dave,
Things have gone from not too bad to worse.
My Drill Chuck in the TT Holder and a pencil held for doing the tracing has
vanished. Can't find it anywhere. I suspect it's now with the Dr. Who "Key
to Time" box set along with a couple of other DVD movies that also vanished a
few mont
the pretty close to round hole.
Anyway. Lots to learn.
John
-Original Message-
From: jrmitchellj [mailto:jrmitche...@gmail.com]
Sent: August-02-21 2:10 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Something went wrong.
It would be interesting for me to see how the par
lph.stirl...@wallawalla.edu]
> > Sent: August-02-21 8:12 AM
> > To: Enhanced Machine Controller (EMC)
> > Subject: Re: [Emc-users] Something went wrong.
> >
> > To elaborate a little more, your description sounds a bit like G42
> cutter compensation, described in
>
..@wallawalla.edu]
>> Sent: August-02-21 8:12 AM
>> To: Enhanced Machine Controller (EMC)
>> Subject: Re: [Emc-users] Something went wrong.
>>
>> To elaborate a little more, your description sounds a bit like G42 cutter
>> compensation, described in
>> http
To elaborate a little more, your description sounds a bit like G42 cutter
compensation, described in
https://linuxcnc.org/docs/2.8/html/gcode/tool-compensation.html .
-- Ralph
On Aug 2, 2021 6:12 AM, Ralph Stirling wrote:
CAUTION: This email originated from outside the Walla Walla University e
Weird! Is it repeatable? Did the program use R or I,J? Just fishing? ;-)
Dave
On 8/1/21 7:25 PM, John Dammeyer wrote:
The milling operation was set up to always be climb milling. Zero point for the
center hole and the outside perimeter was the same. And yet it milled more
away on the LH side
Cutter compensation enabled?
On Aug 1, 2021 7:26 PM, John Dammeyer wrote:
CAUTION: This email originated from outside the Walla Walla University email
system.
The milling operation was set up to always be climb milling. Zero point for the
center hole and the outside perimeter was the same. A
On Mon, 2 Aug 2021 at 03:28, John Dammeyer wrote:
>
> The milling operation was set up to always be climb milling. Zero point for
> the center hole and the outside perimeter was the same.
Was the same tool used for both profiles?
--
atp
"A motorcycle is a bicycle with a pandemonium attachmen
Hello John,
Have you found the problem already? I just came to this and my thoughts are
may be you accidentally used another coordinate system with different
offsets for the hole?
El dom, 1 ago 2021 a las 23:28, John Dammeyer ()
escribió:
> The milling operation was set up to always be climb mil
29 matches
Mail list logo