Re: [Emc-users] AC servo driver, Recommendations/advice requested

2017-03-27 Thread hubert
Forwarded Message Subject:Re: [Emc-users] AC servo driver, Recommendations/advice requested Date: Mon, 27 Mar 2017 13:30:03 -0500 From: hubert <h...@hbahr.org> To: andy pugh <bodge...@gmail.com> On 3/27/17 4:55 AM, andy pugh wrote: > On 25 M

Re: [Emc-users] AC servo driver, Recommendations/advice requested

2017-03-26 Thread Andrew
2017-03-26 7:12 GMT+03:00 hubert: > > > You might ask Copley Controls if Xenus supports that encoder type. > Thanks for bringing this up. >I will report back here how this works out. Reading the user guide > for the REL and its software I found some references to Copley, The > data sheets

Re: [Emc-users] AC servo driver, Recommendations/advice requested

2017-03-25 Thread hubert
On 3/25/17 2:46 PM, Andrew wrote: > 2017-03-25 6:08 GMT+02:00 hubert : > >> I am looking for recommendations and/or advice for driving a >> Harmonic-drive-systems FHA-40C-100-E250 Actuator that I will be using as >> part of the 4th AXIS on my Mill. The motor appears to be about

Re: [Emc-users] AC servo driver, Recommendations/advice requested

2017-03-25 Thread hubert
On 3/25/17 2:46 PM, Andrew wrote: > 2017-03-25 6:08 GMT+02:00 hubert : > >> I am looking for recommendations and/or advice for driving a >> Harmonic-drive-systems FHA-40C-100-E250 Actuator that I will be using as >> part of the 4th AXIS on my Mill. The motor appears to be about

Re: [Emc-users] AC servo driver, Recommendations/advice requested

2017-03-25 Thread Andrew
2017-03-25 6:08 GMT+02:00 hubert : > I am looking for recommendations and/or advice for driving a > Harmonic-drive-systems FHA-40C-100-E250 Actuator that I will be using as > part of the 4th AXIS on my Mill. The motor appears to be about a 1KW > unit with max RPM of 3000 and has

Re: [Emc-users] AC servo driver, Recommendations/advice requested

2017-03-25 Thread andy pugh
On 25 March 2017 at 19:11, hubert wrote: > Are you familiar with any techniques of serially > encoding 2-phase pulse trains? BiSS, EnDAT, SSI are all serial communication protocols used by some encoders. LinuxCNC has drivers for BiSS and SSI for the Hostmot2 modules:

Re: [Emc-users] AC servo driver, Recommendations/advice requested

2017-03-25 Thread hubert
On 3/25/17 5:52 AM, andy pugh wrote: > On 25 March 2017 at 04:08, hubert wrote: >> I am looking for recommendations and/or advice for driving a >> Harmonic-drive-systems FHA-40C-100-E250 Actuator that I will be using as >> part of the 4th AXIS on my Mill. The motor appears to

Re: [Emc-users] AC servo driver, Recommendations/advice requested

2017-03-25 Thread andy pugh
On 25 March 2017 at 04:08, hubert wrote: > I am looking for recommendations and/or advice for driving a > Harmonic-drive-systems FHA-40C-100-E250 Actuator that I will be using as > part of the 4th AXIS on my Mill. The motor appears to be about a 1KW > unit with max RPM of 3000

[Emc-users] AC servo driver, Recommendations/advice requested

2017-03-24 Thread hubert
I am looking for recommendations and/or advice for driving a Harmonic-drive-systems FHA-40C-100-E250 Actuator that I will be using as part of the 4th AXIS on my Mill. The motor appears to be about a 1KW unit with max RPM of 3000 and has an encoder that provides 2500 pulses per revolution.