2017-03-25 6:08 GMT+02:00 hubert <[email protected]>: > I am looking for recommendations and/or advice for driving a > Harmonic-drive-systems FHA-40C-100-E250 Actuator that I will be using as > part of the 4th AXIS on my Mill. The motor appears to be about a 1KW > unit with max RPM of 3000 and has an encoder that provides 2500 pulses > per revolution. Harmonic-drive-systems manuals do not give instructions > on how to set their drivers for the specific Actuator but say use one > that is preset for that actuator. Furthermore the Driver technology > looks a couple of decades old since the support software was written for > Windows 98, ME or NT. They do have the more modern REL driver, but I > have been unable to find the cost for it. > > I might upset you a bit http://www.ebay.com/itm/371870219334 Not sure this drive exactly fits your motor though, but it should.
But here is a similar drive (I'm sure that Copley Controls make REL drives for HD) http://www.ebay.com/itm/262843373444 You might ask Copley Controls if Xenus supports that encoder type. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
